Wiebetech Forensic UltraDockV4 31305-2409-0000 产品宣传页

Forensic UltraDock is WiebeTech's premium Forensic 
Dock. With five ports on the host side, native PATA and 
SATA drive connections, two power options, a recessed 
on/off switch guard, 8 status LEDs in a strong and 
rugged aluminum enclosure, Forensic UltraDock is the 
leading forensic field imager. 

 

Is a nasty Host Protected Area (HPA) or Device Configu-
ration Overlay (DCO) lurking on a suspect hard drive? 
During a forensic investigation, you have to know. 
Forensic DriveDock’s status LED blinks when it detects 
HPA/DCO, without even being attached to a computer!

WiebeTech's proprietary write-blocked technol-
ogy offers read-only access to suspect hard drives 
through eSATA as well as USB and FireWire 800/400 
for maximum versatility. Download and image con-
tents of a suspect drive without risk of data being 
written back to the drive. And it's fully compatible 
with forensic acquisition and analysis software.

An LED indicator assures you that write-block tech-
nology is active and protecting the data. Generation 
4 is loaded with other indicators: FireWire attached, 
USB attached, +12V input jack active, disk drive 
power input jack active and +5V/+12V output active.

Snap the suspect IDE drive into the Dock, plug in 
power and attach a cable to a host computer. Then 
download and image the entire contents to your 
computer. The drive connector allows for automatic 
alignment and easy insertion. For more protection to 
the drive, a mounting plate can be screwed onto the 
bottom of the drive to protect the drive's circuitry.

Write-Blocked

Protects drive's contents by prevent-
ing disk writes - Uses industry-proven 
WiebeTech write-block technology

Additional LED Indicators

Monitor data transfer, including Write-
Block Feature & HPA/DCO Detection

DC Power In and Disk Drive 
Power In

Allows powering using the included 
AC adapter or from standard 4-pin 
drive power connectors

Write-Block Feature Active

Identifies write protection technology 
is operational

+5V, +12V LEDs

Verifies that power output is operational

On/Off Switch

Allows power up/down

FireWire and USB Host 
Detection LED

Identifies valid FireWire or USB  
host attachment

Professional Forensic Access to IDE or SATA Drives Over FireWire 800/400, USB 2, or eSATA

• HPA/DCO Detection Now Included 

• Write Blocked Access to 3.5" IDE Drives & 2.5"/3.5" SATA Drives 

• Read Data via eSATA, FireWire 800/400, or USB 2

• Most Versatile and Professional Drive Imager

• Natively Connects to 3.5" IDE or 2.5"/3.5" SATA Drives