Carematix Inc MOD6 用户手册

Carematix #### 

Connecting to a Device 
  
1.  Please ensure that the batteries are 

installed in the adapter. See below for 
instructions on how to install batteries. 

2.  Connect the device to the adapter using 

the adapter’s cable. Make sure that the 
connection is secure. 

 
Transmitting a Measurement 
 
1.  Take a measurement as you normally do 

using the device. 

2.  If your adapter does not have a Send button, then 

the measurement will be automatically 
transmitted from the device to the adapter. 

3.  If your adapter does have a Send button, 

please press it once after the device has 
taken the measurement. Your 
measurement will now be send to the 
adapter and then on to the receiver hub. 

 

 

4.  Do not yank at the cable as its connection 

to the peak flow meter may become 
unsecured. 

 

1.  Please insure that the device and the 

adapter fit together securely.  

2.  The connector will fit properly only one 

way. If resistance is encountered while 
connecting, please check and reorient 
connector if necessary. 

3.  Please check batteries after approximately 

6 months of regular use and replace if 
necessary.  

 
 
 
 
 

Power Supply 
  
Battery Installation 
  
1.  Open the battery compartment cover on the 

underside of the adapter. 

2.  When the compartment is opened, insert 2 AA 

batteries, making sure they are oriented correctly. 

3.  Replace the battery compartment cover. 
  
Notes: 
1.  Since the batteries installed from the factory at the 

time of shipment are monitor batteries, their life 
may be shorter than regular, new batteries. 

  
Care and Maintenance 
  
1.  Because this unit uses precision parts, care 

should be taken to avoid extremes in temperature 
variations, humidity, shock, dust and direct 
sunlight. 

2.  Do not open or take apart the adapter or its 

components.  There are no user 
serviceable parts. 

3.  Do not drop or strike this unit.  

5.  If the unit is to be stored for a long period, please 

disconnect it from the peak flow meter and be 
sure to remove batteries before storage. 

  
Specifications 
 

Operating Principle 

Serial interface 

Power Supply   

2 AA batteries 

Operating Temperature  +50°F to +104°F  
Relative humidity  

15 to 90% 

Storage Temperature 

-4°F to +122°F 

  

Specifications are subject to change without 
prior notice due to improvements in 
performance and quality. 
 

 

This equipment is guaranteed for the period of 1 year 
after the date of purchase against manufacturing 
defects when returned along with the proof of date of 
purchase.  During this period, the unit will be repaired 
or replaced free of charge if the failure is attributable to 
faulty design or manufacture.  This warranty does not 
cover damage or malfunctions caused by improper 
handling or use contrary to the instructions in this 
manual.  Opening or taking apart the unit or its 
components will void the warranty. Should your 
unit require service, please e-mail to us at 

 

 
The Carematix #### Adapter is designed to 
provide supplemental information only. 
Changes in treatment or therapy should not 
be based on information provided by the 
Adapter.  The clinician is expected to 
exercise clinical judgment and 
independently corroborate the information 
provided by the Carematix #### Adapter 
prior to making any treatment or therapy 
decisions 
 
Therapy or intervention decisions should 
not be based on information provided by the 
Carematix #### Adapter.  Any changes in 
therapy should be based on an actual 
examination by the clinician.