Schulte-Schlagbaum AG LSW 用户手册
Guide
SAFE-O-TRONIC
®
access
LSW
Schulte-Schlagbaum AG
Page 13 of 28
LSW_6-703-2 33S1 3.docx
LSW200 operating modes
The User Code is used by the user to lock or unlock the LSW200. To this end, the LSW200 can be
programmed for five different modes of operation.
1. Free cabinet choice
2.
2.
Fixed cabinet assignment “All-Open”
3.
Fixed cabinet assignment “One-Open”
4.
Fixed cabinet assignment “Auto-List”
5. TGC, time-controlled PIN
Free cabinet choice
An LSW200 in “Free cabinet choice” mode can be locked by entering a
4-digit User Code that can be freely selected. Subsequent unlocking is only possible with this User
Code.
Fixed cabinet assignment
With fixed cabinet assignment, the LSW200 must be programmed with the authorised User Codes.
Here it is possible to choose between the following three modes.
All-Open
In this mode, 4-6 digit User Codes must be programmed into the LSW200. Every programmed User
Code can then lock and unlock the LSW200.
One-Open
In this mode, 4-6 digit User Codes must be programmed into the LSW200. Every programmed User
Code can then lock the LSW200. In contrast to the "All-Open" mode, only the User Code used for
locking the LSW200 can unlock it again.
Auto-List
In this mode, Lock Manager 6 can be used to create a User Code list for the LSW200. This list con-
tains up to 99 User Codes per lock. The most recently used User Code is deactivated when the next
User Code is entered. This User Code can be entered irrespective of whether the LSW200 is un-
locked or locked.
TGC
In this mode, Lock Manager 6 can be used to create a time-controlled PIN Code which allows time-
controlled access to the LSW200. It is not necessary to programme the lock with a new PIN Code in
this mode.