Radwin Ltd. 5XACMD3CN 用户手册
FinM Deployment Guide
Release 4.2.46
1‐6
TBS ‐ Mounting
Site Installation
Vertical Pole ‐ thin
1. Diameter 3/4 to 1 1/2: Before raising the TBS on the pole, position the pole clamp as shown
in the following two figures. Do not completely tighten the bolts:
Thin pole (diameter 3/4 to 1 1/2): Position the pole clamp as shown in the following two figures, do not completely tighten the bolts:
2. Place this assembly on the pole where you want to mount the TBS. Once it is in place,
rotate the pole clamp as shown, then tighten both bolts.
Figure 1‐5: Thin pole: Fasten clamp to base
plate
plate
Figure 1‐6: Thin pole: Do not completely
tighten bolts
tighten bolts
Figure 1‐7: Thin pole: Rotate clamp
Figure 1‐8: Thin pole: tighten bolts
For Regualtor Approval Only