Radwin Ltd. 5XACMD3CN 用户手册
FinM Deployment Guide
Release 4.2.46
1‐11
TBS ‐ Mounting
Site Installation
2. Place this assembly on the pole where you want to mount the TBS. Once it is in place,
rotate the pole clamp as shown, then tighten both bolts.
Horizontal Pole ‐ medium
1. Diameter 2 to 3: Before raising the TBS on the pole, position the pole clamp as shown in
the following two figures. Do not completely tighten the bolts:
Figure 1‐20: Thin pole: Rotate clamp
Figure 1‐21: Thin pole: tighten bolts
Figure 1‐22: Medium pole: Fasten clamp to
base plate
base plate
Figure 1‐23: Medium pole: Do not com‐
pletely tighten bolts
pletely tighten bolts
For Regualtor Approval Only