Radwin Ltd. 5XACMOD3C 用户手册
FinM Deployment Guide
Release 4.5.10
4‐16
Towers Tab
Configuring the Radio Network
Frequency
From the pull‐down menu, choose the frequency at which the
TBS unit will work.
TBS unit will work.
The frequencies are determined by
Band:
and
Channel
Bandwidth:
values in the Tower tab. F1, F2, F3, etc will be the
base frequency chosen in Band, with the value chosen in
Channel Bandwidth added.
Channel Bandwidth added.
For example, if the Band chosen is 5.475‐5.720 GHz, and the
bandwidth is 40MHz, then F1 = 5.475GHz, F2 = 5.515GHz, F3 =
5.555GHz, etc.
bandwidth is 40MHz, then F1 = 5.475GHz, F2 = 5.515GHz, F3 =
5.555GHz, etc.
kHz
The frequency in kHz is shown automatically as a result of your
choice in the Frequency column.
choice in the Frequency column.
Frequency Neighbors
Shows the frequencies of the neighbors of the TBS. The values
shown depend on the names of the neighbors you enter in the
Base Neighbors column.
shown depend on the names of the neighbors you enter in the
Base Neighbors column.
Line
Choose the number of the line here, preceded by a zero.
Dir
Write 1 if there is one TBS that serves both directions, write 2 of
there is a TBS for each direction.
there is a TBS for each direction.
No.
Sequence number of the TBS in the specific line.
Base Neighbors
Enter the name(s) of each TBS that is close enough to be
considered a neighbor. Be careful to enter the exact same term
for the neighboring TBS as shown in the Name column for that
unit. Separate multiple values by a comma.
considered a neighbor. Be careful to enter the exact same term
for the neighboring TBS as shown in the Name column for that
unit. Separate multiple values by a comma.
IP Neighbors List
Shows the IP addresses of the neighboring TBS units in
accordance with the list you created in the Base Neighbors
column.
accordance with the list you created in the Base Neighbors
column.
Neighbor Line No.
Shows, in order, the line number for each neighboring TBS unit,
n accordance with the list you created in the Base Neighbors
column.
n accordance with the list you created in the Base Neighbors
column.
Co‐Channel Neighbor
Used for Interference Mitigation for Co‐channel Neighbors. (see
If your project uses 3 or fewer frequencies, then we recommend
you use this option.
you use this option.
Enter the name(s) of the co‐channel neighbor(s). If there are
more than one, separate them by a comma (no spaces!).
more than one, separate them by a comma (no spaces!).
Co‐Channel Neighbor‐
sIPs
sIPs
Shows the IP address(es) of the co‐channel neighbor(s) in
accordance with the names you recorded in the Co‐Channel
Neighbor column. Used for Interference Mitigation for Co‐
channel Neighbors.
accordance with the names you recorded in the Co‐Channel
Neighbor column. Used for Interference Mitigation for Co‐
channel Neighbors.
CNIndex
Indicates which TBS will use which timeslots in the frame, in the
Interference Mitigation for Co‐Channel Neighbors option.
Interference Mitigation for Co‐Channel Neighbors option.