Radwin Ltd. AMWL1240 用户手册
WinLink 1000 System
2-1
Chapter
2
Installation and Setup
This chapter describes installation and setup procedures for WinLink
1000 system.
After installing the unit, refer to
1000 system.
After installing the unit, refer to
Chapter 3
for configuration
instructions and
Chapter 4
for operation instructions.
In case a problem is encountered, refer to
Chapter 5
for test and
diagnostic instructions.
Internal settings, adjustment, maintenance, and repairs may be
performed only by a skilled technician who is aware of the hazards
involved.
Always observe standard safety precautions during installation,
operation, and maintenance of this product.
performed only by a skilled technician who is aware of the hazards
involved.
Always observe standard safety precautions during installation,
operation, and maintenance of this product.
The operator of the spread spectrum intentional radiator or, if the
equipment is professionally installed, the installer is responsible for
ensuring that the system is used exclusively for fixed, point-to-point
operations . The instruction manual furnished with the intentional
radiator shall contain language in the installation instructions
informing the operator and the installer of this responsibility.
equipment is professionally installed, the installer is responsible for
ensuring that the system is used exclusively for fixed, point-to-point
operations . The instruction manual furnished with the intentional
radiator shall contain language in the installation instructions
informing the operator and the installer of this responsibility.
WinLink 1000 has three types of products:
•
Auto channel selection is not supported–Previous or Future release.
•
Auto channel selection supported–User can enable/disable auto
channel configuration.
channel configuration.
•
DFS–Auto channel is mandatory.
2.1 WinLink 1000 System
WinLink 1000 system comprises the following units:
•
•
Outdoor Unit (ODU): The ODU has 2 configurations: ODU with
integrated antenna and ODU with N-Type connector for connection
integrated antenna and ODU with N-Type connector for connection
Warning
Note
Warning