Radwin Ltd. RW2058 用户手册

RADWIN 1000/2000/5000 User ManualVersion  2.5.30p3

F-16

winlink1000IduSrvAvailServicesReason

1.3.6.1.4.1.4458.1000.2.2.11.1.5

Integer

RO

Information about the TDM Service availability. - 
Not Applicable if the service is available. The 
reasons for TDM Service unavailability: - The 
available throughput isn't sufficient for Service 
demands; - The IDU HW doesn't support the 
service; - A Link Password mismatch was 
detected; - The external pulse type detected is 
improper for TDM services; - A Software versions 
mismatch was detected. 

winlink1000IduSrvEthActive

1.3.6.1.4.1.4458.1000.2.2.12

Integer

RO

Represents the Ethernet service activation state. 

winlink1000IduSrvEthAvailable

1.3.6.1.4.1.4458.1000.2.2.13

Integer

RO

Represents the Ethernet service availability state. 

winlink1000IduSrvEthThroughput

1.3.6.1.4.1.4458.1000.2.2.14

Gauge

RO

Current available Ethernet service throughput in 
bps. 

winlink1000IduSrvEthMaxInfoRate

1.3.6.1.4.1.4458.1000.2.2.15

Integer

RW Holds the maximum bandwidth (kbps) to be 

allocated for Ethernet service. Value of zero 
means that Ethernet service works as best effort. 
The maximum value is product specific. Refer to 
the user manual. 

winlink1000IduEthernetIfTable

N/A IDU Ethernet Interface table. 

winlink1000IduEthernetIfEntry

N/A IDU Ethernet Interface table entry. 

winlink1000IduEthernetIfIndex

RO

If Index corresponding to this Interface. 

winlink1000IduEthernetIfAddress

1.3.6.1.4.1.4458.1000.2.3.1.1.5

DisplayString

RO

IDU MAC address. 

winlink1000IduEthernetNumOfLanPorts

1.3.6.1.4.1.4458.1000.2.3.3

Integer

RO

Number of LAN interfaces in the IDU. 

winlink1000IduBridgeTpAging

1.3.6.1.4.1.4458.1000.2.4.4.2

Integer

RW Timeout in seconds for aging. Note that for this 

parameter to be effective the ODU must be 
configured to HUB mode. A change is effective 
immediately. 

winlink1000IduTdmTxClockAvailStates

1.3.6.1.4.1.4458.1000.2.6.1.1

Integer

RO

Available states of the TDM Transmit Clock 
Control each input status is represented by a bit. 
When the state is available the bit value is 1. When 
the state is unavailable the bit value is 0. The 
available states are: bit 2 = Transparent. bit 3 = 
Local Loop Timed. bit 4 = Remote Loop Timed. bit 
5 = Local Internal. bit 6 = Remote Internal. 

winlink1000IduTdmTxClockDesiredState

1.3.6.1.4.1.4458.1000.2.6.1.2

Integer

RW Required state of the TDM Transmit Clock Control. 

A change is effective after re-activation of the TDM 
service. 

winlink1000IduTdmTxClockActualState

1.3.6.1.4.1.4458.1000.2.6.1.3

Integer

RO

Actual state of the TDM Transmit Clock Control. 

winlink1000IduTdmMasterClockAvailOpti
ons

1.3.6.1.4.1.4458.1000.2.6.2.1

Integer

RO

Available options of the TDM Master Clock Control 
each input status is represented by a bit. When the 
option is available the bit value is 1. When the 
option is unavailable the bit value is 0. The 
available options are: bit 2 = Automatic. bit 3 = 
Trunk #1. bit 4 = Trunk #2. bit 5 = Trunk #3. bit 6 = 
Trunk #4. When no options are available the 
returned value is: 1 

winlink1000IduTdmMasterClockDesired

1.3.6.1.4.1.4458.1000.2.6.2.2

Integer

RW Required TDM Master Clock. A change is effective 

after re-activation of the TDM service. 

winlink1000IduTdmMasterClockActual

1.3.6.1.4.1.4458.1000.2.6.2.3

Integer

RO

Actual Trunk used for TDM Master Clock. 

winlink1000IduTdmConfigTable

N/A IDU TDM Links Configuration table. 

winlink1000IduTdmConfigEntry

N/A IDU TDM Links Configuration table entry. 

winlink1000IduTdmConfigIndex

RO

Table index. 

winlink1000IduTdmIfIndex

RO

Link index in the interface table.