CipherLab Co. Ltd. 8061BL 用户手册

 

8

Batteries must be fresh and properly loaded before start operation. 

The keypad of the 8000 Portable Data Terminal has 21 keys. The functions of some special keys are 
as follows: 
 
SCAN   

        Scan a barcode. 

Press this button will trigger the scanner to read a barcode if the scanner port is 
enabled. 

 
ENTER                  Enter. 

There are two enter keys on the side of the scan key. Normally the enter keys are 
used for command execution or input confirmation. 
 

ESC  

                Escape. 

Usually this key is used to stop and exit current operation. 
 

Back Space.  

If this key is being pressed down longer than one second, a clear code will be 
sent. 
 

        The toggle key for Alphabet / Numeral input. 

When the system is in alpha-mode, a small icon will be shown on the display and 
each numeral key can be used to generate one of the three capital letters. For 
example, numeral 2 can be used to produce A, B or C. Pressing the same key 
twice within one second, will call the letter B. Pressing the same key without 
halting longer than one second, will cause the three letters to be shown in a 
circulating way. Only when stop pressing the key for longer than one second or 
pressing another key, will the system send the real key code to the application 
program. 

 

FN                    

The function key.  

This key cannot be activated alone, it must be pressed with one numeral key at 
the same time. For example, FN + 1 generates function #1, FN + 2 generates 
function #2, etc (up to 9 functions). Also, this key can be combined with the 
UP/DOWN arrow keys to adjust the contrast of the LCD. And when this key is 
combined with the ENTER key, it will turn ON/OFF the backlight. 
 

Power On/Off. 

To prevent a faulty push, it needs about 1.5 sec continuous pressing to turn 
On/Off the power. 

 

This is the default operation mode when turning on the power. The operation depends on the 
application module. Please refer to section 3.4.