SGS Technologies LLC 01 用户手册

BARVISION FOR PALM OS®

2 Select a container to delete by doing one of the 
following:

• Put the data receiver in active listening mode by 

tapping Listen (

) in the upper right-hand 

corner of the screen. With active listening mode 
enabled (

), tilt the container until the appro-

priate item becomes selected in the scroll list.

• Begin entering the name of the container in the 

Lookup field until the appropriate item becomes 
selected in the scroll list.

• Tap the name of the container in the scroll list. If 

the container you want to select is not displayed 
among the currently visible items, drag the Scroll 
Arrows (  and  ) at the right-hand side of the list.

3 Tap Delete  (

).

4 A Confirmation screen similar to the one below will 
be displayed. Tap Yes to delete the container and return 
to the Containers screen.

The pour spout Hardware Detail screen provides 
detailed troubleshooting and diagnostic information 
for the wireless pour spout associated with a container. 
This screen identifies the pour spout’s communication 
statistics, such as: the strength of the signal being 
received from the transmitter tag, the version number 
of the firmware stored in the transmitter tag’s read-only 
memory, and the date and time the data receiver last 
received a transmission from the tag. In addition, 
because BarVision transmitter tags expire after a 
specified number of days or pours (whichever occurs 
first), the Hardware Detail screen identifies the pour 
spout’s expiration information.

For information about the details provided on the 
Hardware Detail screen, see “Pour spout hardware 
details” on page 49.

1 Choose Mgr > Setup > Containers to display the 
Containers screen.