Boston Scientific Neuromodulation Corporation PSC5210W 用户手册
Patient Remote Control
37
Patient Remote Control
Basic Operation
The Remote Control communicates with the Stimulator through a
radio frequency (RF) telemetry link from a distance of up to two feet.
When it is not being used, the Remote Control is in an idle (or sleep)
mode from which it can be reactivated by any button press. During
normal patient use, the device will transition to idle mode automati-
cally after 60 seconds of non-use.
radio frequency (RF) telemetry link from a distance of up to two feet.
When it is not being used, the Remote Control is in an idle (or sleep)
mode from which it can be reactivated by any button press. During
normal patient use, the device will transition to idle mode automati-
cally after 60 seconds of non-use.
1. Area Button
4. Program Button
2. Up/Activate
5. Stimulation On/Off
3. Down/Save