HydroPoint data systems inc. WT008 用户手册
Set Usable Rainfall
1.
1.
Turn the Upper Line dial until you see:
The lower line of the display shows the default setting of
“Inactive.”
“Inactive.”
2.
Turn the Lower Line dial to choose one of the desired percentage
of estimated rain to be on this station.
of estimated rain to be on this station.
•
Inactive to 100% in 25% increments (default setting:
Inactive).
Inactive).
Note:
By default this feature will be inactive. Rain Service is only
available in select regions and must be activated by HydroPoint
Customer Service. If not activated, no % can be set. This feature
is not the same as Rain Pause. Please see “Using Rain Pause” on
page 65 for more information.
Customer Service. If not activated, no % can be set. This feature
is not the same as Rain Pause. Please see “Using Rain Pause” on
page 65 for more information.
To End Automatic Programming
1.
1.
Turn the Upper Line dial until you see:
* Note: Programming may seem a little long at first. But the
COPY feature makes it easy once you have programmed one
station.
COPY feature makes it easy once you have programmed one
station.
To speed up the process of entering this information on other
stations, you simply use the COPY feature to copy the data from
one station to either select stations or to all stations. You can then
edit to make changes to the stations as required. Please see
“Copying” on page 49 for more information.
stations, you simply use the COPY feature to copy the data from
one station to either select stations or to all stations. You can then
edit to make changes to the stations as required. Please see
“Copying” on page 49 for more information.
You can also directly program additional stations.
PROGRAM COMPLETE STA 01
USABLE RAINFALL STA 01
Inactive
Programming Your WeatherTRAK ET Plus
41
Set Slope Factor
1.
1.
Turn the Upper Line dial until you see:
The lower line of the display shows the default setting.
2.
Turn the Lower Line dial to choose one of the following slope
factors:
factors:
•
None/Slight 0-5% Grade (Default Setting),
•
Gentle 6-8% Grade,
•
Mild 9-12% Grade,
•
Moderate 13-20% Grade, or
•
Steep > 20% Grade.
Set Sprinkler Location
1.
1.
Turn the Upper Line dial until you see:
2.
Turn the Lower Line dial to choose one of the following locations
of sprinklers with relationship to the slope.
of sprinklers with relationship to the slope.
•
None, No Slope Set (Default Setting if no slope),
•
All Parts of Slope (Default Setting if slope > none),
•
Top of Slope,
•
Middle of Slope, or
•
Bottom of Slope.
SPRINKLER LOCATION STA 01
All Parts of Slope
SET SLOPE FACTOR STA 01
None/Slight 0-5% Grade
Programming Your WeatherTRAK ET Plus
40