HydroPoint data systems inc. WT008 用户手册
•
Decrease Irrigation -25%,
•
Decrease Irrigation -20%,
•
Decrease Irrigation -15%,
•
Decrease Irrigation -10%,
•
Decrease Irrigation - 5%,
•
no change, 0% (Default Setting),
•
Increase Irrigation + 5%,
•
Increase Irrigation +10%,
•
Increase Irrigation +15%,
•
Increase Irrigation +20%, or
•
Increase Irrigation +25%.
“No Change” will not alter the schedule. This is what the display
looks like when Station 3 is set to Decrease Irrigation -5%:
looks like when Station 3 is set to Decrease Irrigation -5%:
Any stations that are in the “User Programmed” mode will look like
this:
this:
Repeat this pattern of selecting a station to ADJUST and the desired
percentage until complete. After a station and the percentage change
is set, the controller will calculate a new irrigation schedule for that
station.
percentage until complete. After a station and the percentage change
is set, the controller will calculate a new irrigation schedule for that
station.
To see a station that has an ADJUST value, turn the Function Selector
dial to “REVIEW.” The display will look like this:
dial to “REVIEW.” The display will look like this:
Reading from left to right, the upper line shows:
•
STA 01
Station Number
•
09.1 MIN
Length of cycle
•
02X
Number of cycles
•
AUTO
Program Mode
STA 01 09.1 MIN 02X AUTO
Wk1:-MTW-FS-10% Soak 15
ADJUST STA 01
Non-Adjustable Mode 0%
ADJUST STA 03
Decrease Irrigation -5%
Programming Your WeatherTRAK ET Plus
59
Note:
If you want to change an irrigation run time in the “User
Programmed—With ET” mode or the “User Programmed—-NO ET”
mode, it is necessary to make the changes back in the PROGRAM
mode. The ADJUST feature does not operate in these two modes.
mode, it is necessary to make the changes back in the PROGRAM
mode. The ADJUST feature does not operate in these two modes.
The steps to use the ADJUST feature include:
1.
Adjust
You can select individual controller stations with the Upper Line
dial.
dial.
2.
Increase/Decrease Irrigation Percentage
You can adjust irrigation by applying a percentage with the
Lower Line dial.
Lower Line dial.
To use Adjust:
1.
Turn the Function Selector dial to “ADJUST.”
The display will look like this:
The upper line and lower line of the display show the default
settings.
settings.
2.
Turn the Upper Line dial to select the station.
3.
Turn the Lower Line dial to change the percentage.
For this example, we will set Station 3 and decrease
irrigation -5%.
irrigation -5%.
1.
Turn the Upper Line dial to “STA 03.” You can also set:
•
Station 1, 2, 3, ... to the last available station on the controller.
2.
Turn the Lower Line dial to “Decrease Irrigation -5%.” You can
also set the following:
also set the following:
•
Decrease Irrigation -50%,
•
Decrease Irrigation -45%,
•
Decrease Irrigation -40%,
•
Decrease Irrigation -35%,
•
Decrease Irrigation -30%,
ADJUST STA 01
No Change 0%
Programming Your WeatherTRAK ET Plus
58