STEELMATE CO. LTD. BT515201 用户手册
12
TRANSMITTER PROGRAMMING
Note: All transmitter codes must be learned at time of programming!! The PS04-G4 learns up to 4 different
transmitter codes.
transmitter codes.
1. Turn Ignition Key to the ON position.
2. Press Programming button 4 times, then after a few seconds the unit flashes the parking lights 4 times.
3. Press button #1 of the first transmitter. You should get 1 light flash confirming the remote is coded, then press
2. Press Programming button 4 times, then after a few seconds the unit flashes the parking lights 4 times.
3. Press button #1 of the first transmitter. You should get 1 light flash confirming the remote is coded, then press
button #1 of a second transmitter, the unit will flash 2 times confirming the remote is coded and so on. If all 4
codes are learned, the unit will automatically exit code learning mode, otherwise turn key off. See diagram
below.
codes are learned, the unit will automatically exit code learning mode, otherwise turn key off. See diagram
below.
IGN
OFF
WAIT FOR
4 FLASHES
PRESS 4X's
FLASH 2, 3, or 4 X's
IGN
OFF
COMPLETE
PRESS LOCK