Chung Nam Electronics Co. Ltd. WLANTPBG 用户手册

- 13 - 

802.11b frames. The adapter can only use short radio headers if the access point 

supports and uses them. Set to Long Only to override allowing short frames. 

¾ 

Wireless Mode - Specifies 2.4 GHz 54 Mbps, 2.4 GHz 11 Mbps operation in an 

access point network. The wireless adapter must match the wireless mode of the 

access point with which it associates 

¾ 

Wireless Mode when Starting an Ad Hoc Network - Specifies 2.4 GHz 54/11Mbps 

to start an Ad Hoc network if no matching network name is found after scanning all 

available modes. This mode also allows the selection of the channel the wireless 

adapter uses.  The channels available depend on the regulatory domain. If the 

adapter finds no other ad hoc adapters, the channel that the adapter starts the ad hoc 

network with will be selected automatically. The wireless adapter must match the 

wireless mode and channel of the clients it associates. 

¾ 

802.11 Authentication Mode - Select which mode the wireless adapter uses to 

authenticate to an access point: 

• 

Automatic causes the adapter to attempt authentication using shared, but switches it to open 

authentication if shared fails. 

• 

Open System enables an adapter to attempt authentication regardless of its WEP settings. It 

will only associate with the access point if the WEP keys on both the adapter and the access 

point match. 

• 

Shared-key only allows the adapter to associate with access points that have the same WEP 

key.

 

For infrastructure (access point) networks, click Preferred APs… to specify up to four 

access points to the client adapter that attempts to be associated to the access points. 

 

Figure 3-7    Advanced tab of Profile Management 

1.  Go to the Profile Management tab.