ZTE Corporation ZXG-BTS2 用户手册
ZXG10-BTS (V2.9) Technical Manual
82
Confidential and Proprietary Information of ZTE CORPORATION
F
I G U R E
6 3
B
R O A D C A S T
I
N F O R M A T I O N
1 C
H A N G E
P
R O C E D U R E
MS
LAPDm
FURRM
HPIMan
LAPD
BSC
PAGCH
DL_ DATA_IND (BCCH INFO)
(BCCH INFO)
MPH_
RRCmdToCHP
(CHP SET/STOP
BCCH INFO)
(CHP SET CCCH
Para.)
(SYS INFOTYPE
1/2/2bis/2ter/3/4/7/8)
(PAG SET CCCH Para.)
The BSC indicates to the BTS that the new system messages (like (RR)
System Information Type 1/2/2bis/2ter 3/4/7/8) will be broadcast on the
BCCH.
BCCH.
When the BTS receives the BCCH INFO message, the FURRM module will
send the CHP SET BCCH INFORMATION message to the CHP if there is any
send the CHP SET BCCH INFORMATION message to the CHP if there is any
system message. Then, the CHP sends it to the MS. If there is no system
message, the FURRM module will send the CHP STOP BCCH INFORMATION
message, the FURRM module will send the CHP STOP BCCH INFORMATION
message to the CHP, indicating to stop sending these system messages to
the MS.
the MS.
For easy observation of the system message sending, the TRU panel of the
BTS has a signal indicator marked as “MOD”.
BTS has a signal indicator marked as “MOD”.
System Information Type 1 contains the RACH control parameter and cell
configurations, and System Information Type 2 contains the RACH control
parameter and BCCH configurations of adjacent cells. The System
parameter and BCCH configurations of adjacent cells. The System
Information Type 2bis and System Information Type 2ter are optional
messages, containing the BCCH extended configurations of the adjacent
messages, containing the BCCH extended configurations of the adjacent
cells. System Information Type 3 contains the location area ID, cell ID and
other cell information, and System Information Type 4 contains the RACH
other cell information, and System Information Type 4 contains the RACH
control information, location area ID, cell ID and other information. The
System Information Type 7 and System Information Type 8 contain cell
reselection parameters.
System Information Type 7 and System Information Type 8 contain cell
reselection parameters.
The FURRM takes out three parameters (BS_PA_MFRMS,
BS_AG_BLKS_RES and CCCH_CONF) from the Control Channel Description
BS_AG_BLKS_RES and CCCH_CONF) from the Control Channel Description
information unit of the System Information Type 3 message, and sends
them to the CHP and PAGCHM modules.
them to the CHP and PAGCHM modules.
Broadcast Information 2 (SACCH FILL) Change
Procedure
Procedure
The broadcast information 2 (SACCH FILL) change procedure is shown in
Figure 64.