Cardo Systems ER04 用户手册

English

Cardo Rider Q2™ |  

If you have a Bluetooth® enabled mobile phone and would like to make 

and receive phone calls using the Cardo Rider Q2, you must first pair your 

headset to the mobile phone.

NOTE: If you have a compatible Bluetooth® GPS device you wish 

to use with the Cardo Rider Q2, please skip this step, and continue 

ahead to STEP 4: SET UP FOR BLUETOOTH GPS DEVICE.

Pairing is a one time process. Once the headset is paired to a specific 

mobile phone during this Setup Procedure, they will remain paired 

and automatically recognize each other whenever they are within 

range. If the connection between the phone and headset is lost, tap 

the CTRL button to reconnect the devices.

1. Turn on your phone and make sure its Bluetooth® function is 

activated.

2. With the Cardo Rider Q2 headset turned ON, press and hold the 

CTRL Button for at least six seconds until the Red and Blue Lights 

begin rapidly alternating.

3. Search for Bluetooth® devices on your phone by following the 

phone’s instructions. Please consult your phone’s User Manual for 

more information.

4. After a few seconds the phone will list the Cardo Rider Q2 as a 

discovered device. Select it and follow your phone’s instructions to 

accept the pairing.

5. When prompted enter 0000 (four zeros) as your PIN or passkey.
6. Your phone will confirm that pairing has succeeded and the 

headset will begin flashing slowly in Blue.

SETUP AND CONFIGURATION |  

NOTE: If the Pairing process is not completed within two minutes the 

headset will return to Standby mode.
With some mobile phones, you may need to tap the CTRL button 

to connect the headset to the phone after pairing is complete. The 

Cardo Rider Q2 headset will automatically connect to the last phone 

connected to the headset.

If you have a Bluetooth® enabled GPS device and would like to 

transmit navigation instructions and sounds from the GPS device 

through the headset’s speakers, you must first pair your headset to 

the GPS device. 
NOTE: Not all Bluetooth® enabled GPS devices allow connections to 

Bluetooth® headsets like the Cardo Rider Q2. Please consult your GPS 
device’s User Manual for more information.

TO PAIR THE CARDO RIDER Q2 TO A BLUETOOTH® GPS 

1. Turn on your GPS device.
2. With the Cardo Rider Q2 headset turned ON, press and hold the 

CTRL Button for at least six seconds until the Red and Blue Lights 

begin rapidly alternating.

3. Search for Bluetooth® headsets on your GPS device by following 

the device’s instructions. Please consult your GPS device’s User 

Manual for more information.

4. If your GPS device prompts for a PIN or Passkey enter 0000 (four 

zeros).

5. Your GPS device will confirm that pairing has succeeded. The 

headset will begin flashing slowly in Blue. 

6. If you wish to use a Bluetooth® mobile phone to make and 

receive calls through the headset, you must now pair your