YURASYS CO. LTD. L1900CDMA20R 用户手册
Date
2003/05/12
Doc No.
YRT-030512-1
YRT-030512-1
Rev No.
1.0
File Name
Manual_RF_20W.doc
Page
37/42
Report by
JI Hyo Kim
Approve by
Document control Manager
Kong He Hur
Type of Document
Technical Document
Title: 20W RF Repeater System Operating Manual
5.6.8. Gain Table
< Usage >
Use this dialog box to set the start dB (the lowest out power table value), Gain Table
and Analog values for each output power value.
ALC and over power alarm process will operate with this table value
The value of disabled edit box is the current analog output value of each direction.
and Analog values for each output power value.
ALC and over power alarm process will operate with this table value
The value of disabled edit box is the current analog output value of each direction.
< Items >
1. dB: analog: Display the target dBm and the detected analog value.
2. Display the Current detected output power analog value.
3. dB: Write the target output power (dBm)
4. Analog: Write the detected analog value of each out put power in dBm.
5. Update FWD/RVS: After writing the target dB and Analog, Press this button to
3. dB: Write the target output power (dBm)
4. Analog: Write the detected analog value of each out put power in dBm.
5. Update FWD/RVS: After writing the target dB and Analog, Press this button to
download the value to control board.
Change Start: The lowest output power value to make gain table.
To set the lowest output power value, write dB box with –10 ~ 20 value.
FWD/RVS can have different lowest output power value.
FWD/RVS can have different lowest output power value.
Change All Value: To change the analog value.
YQF-041-13 (Rev.0)
Copyright YURASYS 2003