Hewlett Packard Enterprise Company AP175SDR 用户手册
Aruba AP-175 Outdoor Access Point
| Installation Guide
3
AP-175 Hardware Overview
The following section describes the hardware features of the AP-175.
Figure 1 AP-175 Overview (AP-175P shown)
Antenna Interface
The AP-175 requires the use of detachable outdoor-rated antennas. Select the correct antenna type to
support the required frequency band (2.4 or 5 GHz) and the desired coverage pattern.
support the required frequency band (2.4 or 5 GHz) and the desired coverage pattern.
The AP-175 is equipped with four, female N-type antenna interfaces; two on the top of the AP and two on
the bottom. The interfaces are grouped into diversity pairs, one pair is marked R0 (Radio 0) and the other
pair marked as R1 (Radio 1). R0 supports the 5 GHz frequency band and R1 supports the 2.4 GHz radio
band.
the bottom. The interfaces are grouped into diversity pairs, one pair is marked R0 (Radio 0) and the other
pair marked as R1 (Radio 1). R0 supports the 5 GHz frequency band and R1 supports the 2.4 GHz radio
band.
1
Antenna Interface (Radio 1)
5
Antenna Interface (Radio 0)
2
USB Console Interface
6
Antenna Interface (Radio 1)
3
Reserved (AP-175P) or
Power Interface (AP-175AC and AP-175DC)
Power Interface (AP-175AC and AP-175DC)
7
Ethernet Interface (PoE)
4
Antenna Interface (Radio 0)
8
Grounding Point
2
1
3
4
8
7
6
5