Triamp Technology. Ltd. NOODLEBUDS 用户手册

OVER-EAR FITTING

USE YOUR FINGER TO GENTLY INSERT THE EARBUDS IN YOUR EAR.

TAKE OFF HEADPHONES, INSERT CORD INTO THE FINAL ROUNDED SLOTS,
PUT HEADPHONES BACK ON, NOW YOU ARE READY TO GO!

YOU CHOOSE YOUR EAR TIPS FOR

COMFORT AND STABILITY...

NOW IT’S TIME TO EXPERIENCE PURE MUSIC PLEASURE.
THIS IS THE OVER-EAR FITTING OPTION.

IT IS NOT NECESSARY TO REMOVE THE EARBUD STABILIZERS
TO ADJUST THEM FOR AN OVER-EAR FITTING.

THE OVER-EAR FITTING OPTION IS DESIGNED FOR PURE LISTENING PLEASURE.

THE MICROPHONE AND CONTROLS ARE LOCATED BEHIND THE EAR IN THIS FITTING OPTION.

WHILE OVER-EAR FITTING IS A GREAT WAY TO LISTEN TO MUSIC,
SOME ADJUSTMENT IS REQUIRED TO FIT THE EARBUDS CORRECTLY.

CORD MANAGEMENT CLIPS

INSERT CORD INTO THE 2 SLOTS IN EACH CLIP AS SHOWN.

OVER-EAR MODE REQUIRES LESS CORD, SO BEFORE
FITTING, INSTALL THE CORD MANAGEMENT CLIPS
TO SECURE THE SLACK FOR A CUSTOMIZED FIT.

SEE NEXT STEPS.

THE EARBUD AND EAR TIP
DESIGN IS INTENDED TO FIT
COMFORTABLY IN THE EAR
CANAL. IN COMBINATION WITH
THE EARBUD STABILIZER, YOUR
EARBUDS MAKE LISTENING TO
MUSIC SHEER ECSTASY.

INSTALL THE EAR STABILIZER OVER
THE EARBUD AS SHOWN.

TO ADJUST THE FIT, ROTATE THE
STABILIZER ON THE EARBUD.

EAR BUD ORIENTATION

OVER LEFT EAR:

Controller and MIC location

THE EAR TIP IS SPECIFICALLY DESIGNED

FOR A SPECIFIC EAR ORIENTATION.

FOR BEST RESULTS USE THE LEFT

EARBUD IN THE LEFT EAR.

COMFORTABLY SECURED

INSERT THE EARBUD IN YOUR EAR AND ADJUST
AS THE EAR STABILIZER NEEDED FOR MAXIMUM
COMFORT.

IT IS BEST TO TEST EACH EAR TIP TO DETERMINE
THE BEST FIT AND SOUND PERFORMANCE.

MAKE AN “S” SHAPE WITH THE MIDDLE SECTION OF THE CORD.

Connected

CONTROLS AND MIC ON

LEFT

SIDE

EARBUD ORIENTATION

EAR TIP ANGLE DESIGN FOLLOWS INWARD DIRECTION

OF YOUR EAR CANAL FOR A SNUG FIT.

SETTING UP AND FITTING

INDEX

BASIC SETUP

SETTING UP AND FITTING
OVER-EAR FITTING

USING THE EARBUDS

ACCESSORIES
CHARGING THE BATTERY
PAIRING
COMMANDS
SPECIFICATION

...................................................................................02

...............................................................................................14

..................................................................................................... 31

.................................................................................... 31

.............................................................................................................. 33

...................................................................................................... 37

............................................................................................ 38

WARRANTY

............................................................................................ 39

THE EAR STABILIZERS CAN BE ADJUSTED FOR BEST FIT. POSITION THE EAR STABILIZER
AS SHOWN AND GENTLY ADJUST OVER THE NOZZLE.

COMFORT AND SECURITY

IN PLACE TO A MORE COMFORTABLE AND SECURE FIT.

STABILIZER

CONTROL

Left

EAR

ROTATE THE STABILIZER SO IT

FITS UNDERNEATH THE RIM

OF THE EAR STEM.

ONCE ADJUSTED, THE STABILIZER

FITS UNDER THE EAR STEM AND

PROPER FITTING

The best music performance is only
achieved with the right ear to eartip seal.

NEED TO PAIR

See page 33-37 to pair your earbuds.

HOLD
4 SEC.
TO
PAIR

“PAIRING”

ATTACH AN EAR TIP AND PAIR YOUR
EARBUDS TO A BLUETOOTH ENABLED
DEVICE. TRY EACH EAR TIP TO
DETERMINE THE BEST FIT AND SOUND
PERFORMANCE.

ALTERNATING RED/BLUE

USER GUIDE

Wireless Bluetooth Earbuds

THE RIGHT SIZE
FOR GREAT SOUND PERFORMANCE

HEARING IS BELIEVING

Great sound can only be believed with the right size eartip.

Occassionally the eartips move out of place due to body
movement resulting in a reduction in audio quality.
The earbud stabilizers hold the earbuds in place to a more
comfortable and secure fit.

THE CORD

MANAGEMENT

CLIPS

SILICON EAR TIPS

EAR STABILIZER

WIRELESS BLUETOOTH

EARBUDS

WHAT'S INSIDE

THE STABILIZERS ARE ONLY AVAILABLE FOR THE TYPE OF EAR TIPS
INDICATED IN THE ILLUSTRATION.

ADD STABILITY AND COMFORT

VOICE PROMPT:

INSTALL THE EAR STABILIZER TO HOLD THE EARBUDS

CREATES A COMFORTABLE SNUG FIT.

ACCESSORIES

CHARGING

USING THE EARBUDS

CONNECTED

HOLD
4 SEC
TO
PAIR

AUDIBLE:

When you hear “Power on”, continue pushing until you
hear “PAIRING”.

PAIRING MODE: ALTERNATING RED AND BLUE LEDS

REGISTER YOUR DEVICE TO RECEIVE UPDATE INFORMATION

http://www.noodlebuds.com

GREAT MUSIC REQUIRES GOOD EARS

Avoid prolonged periods of use

and excessive audio levels.

The use of earbuds around road traffic is not advisable.

Wireless bluetooth earbuds
Carrying case
3 eartips pairs (S,M,L)
1 ear stabilizer pair
2 cord management clips
1 USB cable
1 quick start quicle

Before using your Bluetooth earbuds, make sure you
fully charge them to extend the life of the battery.
1. To access the USB port (controller box), pull back the cover

to expose the USB port.

2. Insert the USB cable into the port. The LED light starts red

and turns blue once charging is complete.

A full charging requires up to 1.5 hours.

3. To check earbuds’ battery status: Turn earbuds on. top

volume up or down to trigger a status response.

Note:When listening to music, tap Pause and wait for blue

LED to flash rapidly. Tap volume up or down to trigger a

status response.

PAIRING TO YOUR PHONE / MUSIC DEVICE THE FIRST TIME

1. Press and hold the audio/call button for more than four seconds. The LED flashes an alternating red and

blue indicating the pairing process is ongoing.

2. Turn on the Bluetooth on your phone/device and allow it to search for new devices.

3. Select the [NOODLEBUDS] to initiate pairing. If a password is necessary, enter 0000. After successfully

pairing to your phone/device, an audible prompt “Headset connected” is heard.

4. If the pairing is not successful, power down the earbuds by pressing the the audio/call button for four

seconds. Repeat the pairing process once again.

PAIRING WITH A BLUETOOTH ADAPTER

Once the initial pairing has taken place, you may want or require to pair to other smart devices.

1. Set the earbuds in pairing mode: If earbuds are powered off, press and hold the audio/call

button until the audible “pairing” sounds. The LED alternates between blue and red to indicate
a pairing mode.

2. Activate the Bluetooth function on your smart device and allow it to search for devices.
3. On your smart device list, select [NOODLEBUDS]. If a password is necessary, enter 0000.

After successfully pairing to your phone/device, an audible prompt “headset connected” is

heard.

PAIRING WITH SEVERAL BLUETOOTH DEVICES

Once a device is paired to the Handsfree Bluetooth Earbuds, you do not need to pair it again.
Up to eight smart devices can be paired to the earbuds. Follow the same instructions as provided

previously to pair new devices.
Once the total of eight devices are paired and upon pairing the ninth device, the oldest paired device

will be deleted from the memory list.
Switching between paired devices is easy. Turn off the Bluetooth function on the smart devices to

disconnect them from the Wireless Bluetooth Earbuds.
Turn on the Bluetooth function of the device that requires the connection and, from the device list,

press the [NOODLEBUDS] to re-connect.

COMMANDS

TAP

PRESS > 2 SEC.

PRESS > 4 SEC.

OFF

Redial

Tap to answer or end a call
Reject a call, voice dial

Mute & unmute call:

Simultaneously press volume up

(+) and down (-) buttons. The audible “mute on” or

“mute off” is heard. An alert repeats every 5 minutes

when mute is on.

Use call waiting:

Tap the audio/call button to put the

first call on hold and answer the second call.

To switch between calls, tap the audio/call button.

To end the second call and retrieve the first call,

press the audio/call button for 2 seconds.

SPECIFICATIONS

aptX™ audio enhancement
HFP v1.6 wideband speech, HSP v1.2, A2DP v1.2, AVRCP v1.4
MAX. 10 meters (30 feet)
Music & calls up to 5 hours
Auto sleep after 5 minutes, >180 days in sleep mode
DC 5V 100mA
Approximately 1.5 hours
34.5(H) x 15.7(W) mm earbud size, 643 mm cord length
Approx 14.5g

Bluetooth v3.0 specification support
Profile
Effective Range
Working time
Standby time
Input voltage
Charging time
Dimensions
Weight

AUDIBLE “BATTERY LOW”

Approx. 5 mins prior to empty.

LED STATUS

ARE HEADPHONES ON

? IS BATTERY LOW?

LED flashes:
Red: Low battery / Power on
Blue: During connected
Off: Powered off

MICRO USB PORT

Locate the cover and pull back to expose the
micro USB port. 1.5+ hrs for full charge
provides 5 hours of playtime. 30 mins
charging provides 90 minutes of playtime.

Red (USB cable connected): Charging
Blue (USB cable connected): Charged
Red+Blue Alternating: Pair Mode
LED off: Powered Off

Tap the + & - button to change language*.
Press the + & - button for 2 seconds to
toggle Voice Prompt on.
Press the + & - button for 5 seconds to
toggle Voice Prompt off.

* Voice guide supported: English , France, German, Spain,

Chinese and Japanese.

Voice Alert List : Redial, Power on, Power off, Select Language English,

Enable voice

Prompt, Pairing, Pairing successful, Low battery charge

headset, Battery Low, Battery

middle, Battery high, Headset connected, Mute on, Mute off.

Voice Prompts

WARRANTY, CARE & MAINTANCE

WARNING: Due to the isolating characteristics of these headphones do not use while driving, riding a bike or where vehicular
traffic is present , or in any other activity where failure to hear surrounding sounds could be dangerous. Use of these
headphones at excessive volumes may cause permanent hearing damage. Always turn the volume down before use. Take
caution in regards to inserting objects into ear canal, use at own risk.

Copyright 2014 Triamp Technology., LTD. All rights reserved. Triamp and the Triamp logo are trademarks of Triamp
Technology., LTD. Bluetooth is a trademark owned by Bluetooth SIG, Inc. USA, and licensed to Triamp Technology., LTD. iPhone
is a trademark of Apple, Inc., registered in the U.S. and other countries. Manufactured under European patent no. EP1410607B1
& corresponding foreign patents. Assembled in China.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference,and (2) this device must accept any interference received, including interference that may cause
undesired operation.Any changes or modifications to device will void the user’s authority to operate the device. The battery is
recycled. Do not dispose of the battery in fire, as it may cause explosion.

Full warranty, care and maintenance details at http://www.noodlebuds.com

Changes or modifications not expressly approved by the
party responsible for compliance could void the user's
authority to operate the equipment.