SendFar Technology Co. Ltd. OAB-03001 用户手册
Alias name of this internal server, such as FTP.
Version 1.00
27
- Access Interface
Indicate the translation occurs on which interface (Wireless interface /
Ethernet interface), such as Ethernet.
Ethernet interface), such as Ethernet.
- Protocol
Indicate which protocol (TCP/UDP) you want to translate from outside to
internal server, such as TCP.
internal server, such as TCP.
Public Access Port number: Indicate which socket port (1 ~ 65535) you
want to translate from outside to internal server, such as 21.
want to translate from outside to internal server, such as 21.
Virtual Server IP address: Specify the private IP address of the internal
server, such as 192.168.1.100.
server, such as 192.168.1.100.
Virtual Server Port number: Specify the socket port (1 ~ 65535) of the
internal server, such as 21.
internal server, such as 21.
3. Click
OK . The Virtual Server Entry Table appears with the entries list.
4.3.1 Configure Community Pool
4. To modify or delete a virtual server entry, click the select button beside
the entry index number and click Modify or Delete .
The SNMP Community Pool has five entries.
1.
To modify a entry, click the select button beside the entry index
number and then click Modify , the configuration page appears as
following figure.
number and then click Modify , the configuration page appears as
following figure.
5. To add another entry to the Virtual Server Mapping Pool, repeat step 1
through step 3.
1.
When you have included all the entries you need, click FINISH .
4.3 Configure
SNMP
Select the “/General Config/ TCP/IP/SNMP”, and then the SNMP screen
appears. The following figure shows the current SNMP community pool and
trap host pool.
appears. The following figure shows the current SNMP community pool and
trap host pool.
Version 1.00
26