HCV Consulting 100001 用户手册
HCV Wireless Pty Ltd
Commercial – In Confidence
BlueMod User Guide v0.01.doc
P:\bluemod\doc\BlueMod User Guide v0.01.doc
Page 13 of 15
Connecting BlueMod™ Accessory Boards
When connecting or removing a BlueMod™ Accessory Board,
ensure the power is off and wear an anti-static wrist or ankle
strap. The Accessory Connectors have an average mating life
of 100 cycles so swapping should be minimised.
ensure the power is off and wear an anti-static wrist or ankle
strap. The Accessory Connectors have an average mating life
of 100 cycles so swapping should be minimised.
To connect an Accessory Board to BlueMod™:
1.
Unplug any sources of power and open the BlueMod™
casing.
2.
Place the Accessory Board on top of the BlueMod™
SBC. Carefully align the
Accessory Connectors and the Mounting Holes as shown below:
Aligning the BlueMod™ Accessory Board
4. Squeeze the two circuit boards together until the connectors snap together.
5. Lock the board in place by securing the Accessory Board Mounting Hole
screw. Failure to do so may result in intermittent failure.
CAUTION!