Redline Communications Inc. AN100UA 用户手册
Red
MAX
™
Base Station
User Manual
Doc. #70-00058-01-01
Proprietary Redline Communications © 2007
July 13, 2007
Page 35 of 117
4.2.2 Status
Click
Status
in the system menu (left side of screen) to view status information about the
wireless interface and Ethernet management interface. Values are updated according to
the screen refresh rate.
the screen refresh rate.
Figure 15: Web: Monitoring - Status - Wireless Status Screen
Wireless Status
CINR [dB]: Mean Carrier/(Interference + Noise) ratio. The CINR value is calculated and
displayed for each automatic screen refresh. The CINR measured by the base station is
based on the signal from the subscriber. Based on this value, the base station may request
that the subscriber change modulation rate.
Traffic Downlink [kbps]: Rate of traffic transmitted to subscribers.
BW Margin Downlink [kbps]: Downlink bandwidth available that can be scheduled by
the base station (based on the minimum traffic rate settings for all active service flows).
CRC Errors: Number of CRC errors detected on packets received from subscribers. This
counter is reset when an base station is rebooted.
Note: The CRC Errors counter in the SS Info screen is reset when a subscriber is
registered.
Air Interface Status: Status of the base station modem:
displayed for each automatic screen refresh. The CINR measured by the base station is
based on the signal from the subscriber. Based on this value, the base station may request
that the subscriber change modulation rate.
Traffic Downlink [kbps]: Rate of traffic transmitted to subscribers.
BW Margin Downlink [kbps]: Downlink bandwidth available that can be scheduled by
the base station (based on the minimum traffic rate settings for all active service flows).
CRC Errors: Number of CRC errors detected on packets received from subscribers. This
counter is reset when an base station is rebooted.
Note: The CRC Errors counter in the SS Info screen is reset when a subscriber is
registered.
Air Interface Status: Status of the base station modem:
Enabled - Transceiver is operating normally.
Disabled - Transceiver is disconnected, disabled, or defective.
Disabled - Transceiver is disconnected, disabled, or defective.
IDU Temperature [Celsius]: Internal temperature of the indoor terminal.
Power Supply Status: Display the status of the power circuits.
Power Supply Status: Display the status of the power circuits.
A-On - Terminal is equipped with AC circuits only.
D-On - Terminal is equipped with DC circuits only.
A-D - Terminal is equipped with AC and DC circuits.
D-On - Terminal is equipped with DC circuits only.
A-D - Terminal is equipped with AC and DC circuits.
Active DL Service Flows: Number of currently active downlink service flows.
DL SMC Rate [kbps]: Data rate for downlink channel.
DL SMC Rate [kbps]: Data rate for downlink channel.