Redline Communications Inc. AN100UA 用户手册
Red
MAX
™
Base Station
User Manual
Doc. #70-00058-01-01
Proprietary Redline Communications © 2007
July 13, 2007
Page 44 of 117
4.3.1 Subscribers
Click
Subscribers
in the menu (left side of screen) to view a summary of the subscribers
currently configured on the base station.
Figure 21: Configuration - Service Class Screen
Subscriber Index: Unique index number to identify this subscriber. This number is
generated automatically by the base station. The user can also specify an index number
(must be unique) when creating a new subscriber entry.
Subscriber MAC: MAC address of the subscriber. You must enter this information
when creating a new subscriber entry.
Subscriber Name: Enter the name for this subscriber. This reference is displayed when
managing service flows and classifiers.
Note: When upgrading from RedMAX v1.0 this field will automatically be populated with
the subscriber MAC address. The name is not imported from the subscriber (set using
SNMP or CLI).
Max Hosts Number: Enter the maximum number of MAC addresses to discover on the
Ethernet interface to this subscriber. Valid only if
generated automatically by the base station. The user can also specify an index number
(must be unique) when creating a new subscriber entry.
Subscriber MAC: MAC address of the subscriber. You must enter this information
when creating a new subscriber entry.
Subscriber Name: Enter the name for this subscriber. This reference is displayed when
managing service flows and classifiers.
Note: When upgrading from RedMAX v1.0 this field will automatically be populated with
the subscriber MAC address. The name is not imported from the subscriber (set using
SNMP or CLI).
Max Hosts Number: Enter the maximum number of MAC addresses to discover on the
Ethernet interface to this subscriber. Valid only if
Learning Enabled
=
Yes
.
Learning Enabled: The MAC learning feature allows the base station to automatically
learn the MAC addresses of up to sixteen hosts (devices) on the Ethernet segment
connected to a subscriber. The learning feature can be enabled individually for any
subscriber.
learn the MAC addresses of up to sixteen hosts (devices) on the Ethernet segment
connected to a subscriber. The learning feature can be enabled individually for any
subscriber.
Yes: Auto-learning is enabled for this subscriber.
No: Auto-learning is disabled for this subscriber.
No: Auto-learning is disabled for this subscriber.
Only (up to) the first sixteen learned hosts are recorded. The subscriber and base station
do not use 'MAC aging' and each learned host address will remain in the learning table
until the subscriber is rebooted. Reboot the subscriber to clear the MAC address table and
discover the current active hosts.
Add: Click
do not use 'MAC aging' and each learned host address will remain in the learning table
until the subscriber is rebooted. Reboot the subscriber to clear the MAC address table and
discover the current active hosts.
Add: Click
Add
to create a new subscriber listing. This button is active only when a new
MAC address has been specified in the
Subscriber MAC
field. When adding new