Redline Communications Inc. AN100UA 用户手册
Red
MAX
™
Base Station
User Manual
Doc. #70-00058-01-01
Proprietary Redline Communications © 2007
July 13, 2007
Page 80 of 119
Table 24: CLI - Interfaces Command
Interface
Command
Parameter/Description
TimeZoneHourEnter the offset (hours) from GMT.
TimeZoneMinuteEnter the offset minutes (fraction) from
GMT.
GMT.
DayLightSavingsEnable automatic time change for
daylight savings.
0: Disabled
1: Enabled
1: Enabled
SysLogIPEnter the IP address of the System Log server.
DhcpServIPUsrSpecify the IP address of a DHCP server.
The base station forwards all subscriber DHCP requests to
this address.
The base station forwards all subscriber DHCP requests to
this address.
DhcpTypeSet the DHCP relay type.
0:
0:
Base station forwards all subscriber DHCP requests
to the DHCP server that the base station used to
obtain its IP address.
to the DHCP server that the base station used to
obtain its IP address.
1:
Subscriber to use the specified DHCP server. Use
DhcpServIPUs to specify the DHCP server to be used by
subscribers.
subscribers.
MgmtVLANEnable or disable management using VLAN
tagged traffic.
0:
Disable tagged management.
1
Enable tagged management.
VlanIdEnter the VLAN ID (VID) for the management
VLAN.
VLAN.
defaultRestore all settings to factory default values.
wireless
Wireless interface configuration settings:
set
Modify settings.
RfDLChannel - <3400000 - 3600000; step=250>
RfSeparation - <-100000 - 100000; step=50000>
RfTxOutputPower - <0 - 23; step=1>
RefRSS
RfDLChannel - <3400000 - 3600000; step=250>
RfSeparation - <-100000 - 100000; step=50000>
RfTxOutputPower - <0 - 23; step=1>
RefRSS
Enter the reference RSS value
SSTxPowerControl - 0 -- disable; 1 -- enable
RfAutoRxGainEnable - 0 -- disable; 1 -- enable
PhyClk
RfAutoRxGainEnable - 0 -- disable; 1 -- enable
PhyClk
80 -- UnlicensedProprietary
84
--
Multiple_Of_1.5MHz
91
--
Unlicensed
96
--
Multiple_Of_1.75MHz
ChannelBandwidth
5 -- 7 Mhz
6 -- 3.5 Mhz;
CyclicPrefix (phyCp)
0
0
--
1/32
1
--
1/16
2
--
1/8
3
--
1/4