Redline Communications Inc. AN100UXA 用户手册
User
AN-100U/UX Base Station
Manual
70-00058-01-04
Proprietary Redline Communications © 2010
Page 14 of 136
April 19, 2010
6. Do not connect an AN-100U/UX to an outdoor transceiver until you have confirmed
the FCC-specific software is loaded and operational on the AN-100U/UX and the
available operating range is 3650-3700 MHz.
available operating range is 3650-3700 MHz.
1.4.3 FCC Power Settings
FCC regulation part 90.1321 (governing operation in the 3650-3700 MHz band in the
US) states that base station transmissions are limited to a maximum transmit power of 1
Watt/MHz (peak EIRP).
US) states that base station transmissions are limited to a maximum transmit power of 1
Watt/MHz (peak EIRP).
AN-100U Power Settings
The following table should be used to configure the maximum transmit power setting on
the AN-100U depending on the antenna used:
the AN-100U depending on the antenna used:
Table 2: Notices - AN-100U Antenna/Tx Power Setting Combinations for FCC
Redline PN
Ant. Gain
(dBi)
Antenna Description
App.
Max. Tx Power GUI Setting
3.5 MHz
7 MHz
PA1760EAS
17
Sector Antenna: 60 degree,
17 dBi, vertical polarization.
17 dBi, vertical polarization.
PMP
16
19
PA1660EASH
15
Sector Antenna: 60 degree,
16 dBi, horizontal polarization.
16 dBi, horizontal polarization.
PMP
18
21
PA1590EAS
15.4
Sector Antenna: 90 degree,
15.4 dBi, vertical polarization.
15.4 dBi, vertical polarization.
PMP
18
21
PA1590EASH
15
Sector Antenna: 90 degree,
15 dBi, horizontal polarization.
15 dBi, horizontal polarization.
PMP
18
21
PA14120EAS
14
Sector Antenna: 120 degree,
14 dBi, horizontal polarization.
14 dBi, horizontal polarization.
PMP
19
22
PA14120EASH
14
Sector Antenna: 120 degree,
14 dBi, horizontal polarization.
14 dBi, horizontal polarization.
PMP
19
22
A11360EAO
11
Sector Antenna: 360 degree,
11.0 dBi antenna.
11.0 dBi antenna.
PMP
22
23
Note: The RF output power and selection must be professionally programmed and installed by
the manufacturer or a trained professional installer. Values do not include implementation (cable)
loss of up to 1 dB).
the manufacturer or a trained professional installer. Values do not include implementation (cable)
loss of up to 1 dB).
AN-100UX Power Settings
The AN-100UX is certified for use in a splitter configuration. This configuration
– using
an RF splitter/combiner and RF cables
– introduces 10 dB of losses in the transmission
path. The following table should be used to calculate the maximum transmit power
setting on the AN-100UX:
setting on the AN-100UX:
Table 3: Notices - AN-100UX Maximum Transmit Power Settings for FCC
Channel Size
GUI setting
3.5 MHz
44 dBm
– antenna gain (dBi)
7 MHz
47 dBm
– antenna gain (dBi)