Redline Communications Inc. AN100UXA 用户手册
User
AN-100U/UX Base Station
Manual
70-00058-01-04
Proprietary Redline Communications © 2010
Page 37 of 136
April 19, 2010
4.1.1 Configuration Using a Web Browser
1.
Set the IP address of your PC to the following settings:
IP Address:
192.168.101.110
Subnet mask: 255.255.255.0
2.
Connect the host (laptop) computer directly to the Data port of the base station
terminal using an RJ-45 Ethernet (straight-through) cable.
terminal using an RJ-45 Ethernet (straight-through) cable.
3.
Power-on the base station terminal and restore the factory default settings by
depressing the reset switch on the front panel for more than five (5) seconds.
depressing the reset switch on the front panel for more than five (5) seconds.
4.
Launch a Web Browser on the PC and enter the terminal IP address in the browser
address field (192.168.101.3). The General Information screen is displayed and the
operator can now login to the terminal.
address field (192.168.101.3). The General Information screen is displayed and the
operator can now login to the terminal.
Figure 15: Web: Access - Browser Address Field
Click on any configuration menu item to activate the login dialog screen.
Figure 16: Web: Access - Base Station Login Screen
Enter the default user name and password:
User Name: admin
Password:
admin