Redline Communications Inc. AN100UXA 用户手册
User
AN-100U/UX Base Station
Manual
70-00058-01-04
Proprietary Redline Communications © 2010
Page 46 of 136
April 19, 2010
SF Info
Click the subscriber name in the
SS Info
screen to view service flow statistics.
Figure 21: Web: Monitoring - SS Info - SF Info Screen
Service Flow Information
SFID: Service flow identifier for this service flow.
Direction: Direction of service flow:
Downstream: Downlink traffic from base station to subscriber.
Upstream: Uplink traffic from subscriber to base station.
State: Current state of the service flow.
Active: Service flow is currently active.
Admitted: Service flow is being edited or SC is setting up the service flow.
Authorized: Service flow configuration has been saved but is not active.
Rejected: Base Station was not able to setup the service flow.
Provisioned Time: Time elapsed since this service flow became active.
CS Specification: Classification type associated with this service flow.
802.3 Ethernet: Classified using fields in the Ethernet header.
802.1Q: Classified using fields in the Ethernet header and the 802.1Q VLAN tag.
IPv4: Classified using fields in the packet IP header.
IPv4 Over 802.3 Ethernet: Classified using fields in the packet's IP header and the
Ethernet header.
Ethernet header.
IPv4 Over 802.1Q: Classified using fields in the packet's IP header, the Ethernet
header, and the 802.1Q VLAN tag.
header, and the 802.1Q VLAN tag.
Enable/Disable: Indicate the operator-selected status for this service flow:
Enabled: Service flow is enabled.
Disabled: Service flow is disabled.
Throughput Kbits/sec: Traffic throughput rate for this service flow.
Total Packets: Total packets exchanged with the subscriber (all service flows).
Controls
Reset: Click
Reset
to reboot the subscriber MAC (subscriber will be deregistered).
Deregister: Click
Deregister
to force the subscriber to be deregistered (no reboot).
Refresh: Click
Refresh
to update the screen with the latest totals.