Redline Communications Inc. AN100UXA 用户手册
User
AN-100U/UX Base Station
Manual
70-00058-01-04
Proprietary Redline Communications © 2010
Page 55 of 136
April 19, 2010
Add Service Flow
Next Sfld: This identifier value is assigned to the next new service flow.
SS Name: Name of subscriber associated with this service flow.
Direction: Direction of service flow. Separate service flows are required for upstream
and downstream traffic.
and downstream traffic.
Downstream: Downlink traffic from a base station to a subscriber.
Upstream: Uplink traffic from a subscriber to the base station.
SC Name: Select the service class definition for this service flow.
Cs Specification: Convergence sublayer encapsulation type associated with this
service flow.
service flow.
802.3 Eth: The classifiers for this service flow are based on the combination of fields
in the Ethernet header.
in the Ethernet header.
802.1Q VLAN: The classifiers for this service flow are based on the combination of
the fields in the Ethernet header and 802.1Q VLAN tag.
the fields in the Ethernet header and 802.1Q VLAN tag.
IPv4: The classifiers for this service flow are based on the IPv4 IP header.
IPv4 Over 802.3: The classifiers for this service flow are based on the combination
of fields in the IPv4 header and the Ethernet header.
of fields in the IPv4 header and the Ethernet header.
IPv4 Over 802.1Q: The classifiers for this service flow are based on the combination
of fields in the IPv4 header and the 802.1Q VLAN tag.
of fields in the IPv4 header and the 802.1Q VLAN tag.
Add (Modify): Click
Add
to create a new service flow definition using the current
settings. This control is also displayed as
Modify
after clicking
Template
or
Edit
.
Note: Service flows can be activated only after the requested configuration is validated
and saved. See 4.3.5: Manage -- Save Provisioning Information on page 62.
and saved. See 4.3.5: Manage -- Save Provisioning Information on page 62.
Delete SF (and Classifiers)
Service Flow Identifier: Unique index number of the service flow to be deleted.
Delete: Click
Delete
to delete the selected service flow (and all associated classifiers).
Note: If the subscriber using this service flow is not registered, the service flow is deleted
immediately. If the subscriber is registered, a Dynamic Service Deletion (DSD) session
is initiated to delete the service flow. The service flow is deleted when the subscriber
sends acknowledgement or becomes deregistered.
immediately. If the subscriber is registered, a Dynamic Service Deletion (DSD) session
is initiated to delete the service flow. The service flow is deleted when the subscriber
sends acknowledgement or becomes deregistered.
Service Flows
Select: Select the unique index number for the service flow to display.
Template: Click
Template
to modify any field for the selected service flow. Clicking
Edit
changes in the fields adjacent to the
Modify
button (top of screen).
Edit: Click
Edit
to change only the service class associated with this service flow.
ShowAll: Click
ShowAll
to display settings for all service flows.
HideAll: Click
HideAll
to hide the settings for all service flows.
Enable: Click
Enable
to enable this service flow (will be provisioned to active).
Disable: Click
Disable
to disable this service flow (will not be provisioned).
Service Flow Status Display
Left-click the mouse on the heading for any column to sort the table using that selection.
SFID: Unique index number assigned when this service flow was created. This number
is required when creating a classifier for the service flow (classifier configuration screen).
is required when creating a classifier for the service flow (classifier configuration screen).