Redline Communications Inc. AN100UXA 用户手册
User
AN-100U/UX Base Station
Manual
70-00058-01-04
Proprietary Redline Communications © 2010
Page 76 of 136
April 19, 2010
1. You must obtain the latest base station binary files. You must copy the binary files
into the default file location for the FTP server. You can not specify a 'path' in the
upgrade dialog.
upgrade dialog.
2. The base station performs all software upgrades using an FTP server:
a)
The FTP server must be located on the network connected to an active Ethernet port
(Data or Mgmt) on the base station.
b) The FTP server must have a user defined as follows:
username:
target
password:
secret
Upgrade Base Station
1. Start a Web browser session to the base station and login. The factory default
settings are as follows:
Login:
admin
Password:
admin
2. Click Software Upgrade in the left-hand menu and make the following settings:
Protocol:
FTP
Server IP address: [enter address of FTP server]
User:
target
Password:
secret
File Path:
[Enter binary file name -- including .bin extension]
3. Click Upgrade and wait for the base station to download and save the binary file.
This process may take a few minutes. Progress is indicated in the Status field. The
Status Screen displays 'Update OK' when the upgrade is complete.
Status Screen displays 'Update OK' when the upgrade is complete.
4. In the Software Upgrade screen, Select the new version and click Apply&Reset to
activate the new software. Click Yes in the confirmation dialog.