Redline Communications Inc. AN100UXA 用户手册
User
AN-100U/UX Base Station
Manual
70-00058-01-04
Proprietary Redline Communications © 2010
Page 89 of 136
April 19, 2010
Table 35: CLI - Interfaces Command: advancedConfig (debug mode)
Command
Parameter/Description
2 - QPSK(3/4)
3 - 16QAM(1/2)
4 - 16QAM(3/4)
5 - 64QAM(2/3)
6 - 64QAM(3/4)
GpsHoldoverStart Time in seconds after detecting GPS signal lost before
entering holdover mode. Default is 30 seconds.
GpsHoldoverEnd Time in seconds in holdover mode before reporting GPS signal
lost. Default is 15 seconds.
NoiseThreshold: Enter the maximum noise threshold (-123 to -65 dBm). If the
measured noise (or interference) level exceeds this threshold, the
base station stops transmitting until the noise level is lower than this
threshold. Refer to 1.4: Deployment in the USA -- FCC Notices on
page 13.
base station stops transmitting until the noise level is lower than this
threshold. Refer to 1.4: Deployment in the USA -- FCC Notices on
page 13.
ShowSsMac Choose information to show in log message.
0 - disable. Show SS name in log message.
1 -- enable. Show SS MAC address in log message.
ReqBkEnd
Enter the final backoff window size for contention during bandwidth
requests.
requests.
Must be in range [4-8] inclusive, and equal or greater than
'ReqBkEnd';
'ReqBkEnd';
ReqBkStart Enter the starting backoff window size for contention during
bandwidth requests.
Must be in range [2-5] inclusive, and equal or less than 'ReqBkEnd';
RngBkEnd Enter the final backoff window size for initial ranging contention.
Must be in range [4-8] inclusive, and equal or greater than
'RngBkEnd';
'RngBkEnd';
RngBkStart Enter the starting backoff window size for initial ranging contention.
Must be in range [2-5] inclusive, and equal or less than 'RngBkEnd';
Th16Qam3/4To64Qam2/3 - CINR Value (dB) Up to 3 decimal places.
Th16Qam3/4To16Qam1/2 - CINR Value (dB) Up to 3 decimal places.
Th16Qam1/2To16Qam3/4 - CINR Value (dB) Up to 3 decimal places.
Th16Qam1/2ToQpsk3/4 - CINR Value (dB) Up to 3 decimal places.
Th64Qam3/4To64Qam2/3 - CINR Value (dB) Up to 3 decimal places.
Th64Qam2/3To64Qam3/4 - CINR Value (dB) Up to 3 decimal places.
Th64Qam2/3To16Qam3/4 - CINR Value (dB) Up to 3 decimal places.
ThQpsk3/4To16Qam1/2 - CINR Value (dB) Up to 3 decimal places.
ThQpsk3/4ToQpsk1/2 - CINR Value (dB) Up to 3 decimal places.
ThQpsk1/2ToQpsk3/4 - CINR Value (dB) Up to 3 decimal places.
ThQpsk1/2ToBpsk1/2 - CINR Value (dB) Up to 3 decimal places.
ThBpsk1/2ToQpsk1/2 - CINR Value (dB) Up to 3 decimal places.
ULModDefault Select the default modulation and coding rate for the uplink
Th16Qam3/4To16Qam1/2 - CINR Value (dB) Up to 3 decimal places.
Th16Qam1/2To16Qam3/4 - CINR Value (dB) Up to 3 decimal places.
Th16Qam1/2ToQpsk3/4 - CINR Value (dB) Up to 3 decimal places.
Th64Qam3/4To64Qam2/3 - CINR Value (dB) Up to 3 decimal places.
Th64Qam2/3To64Qam3/4 - CINR Value (dB) Up to 3 decimal places.
Th64Qam2/3To16Qam3/4 - CINR Value (dB) Up to 3 decimal places.
ThQpsk3/4To16Qam1/2 - CINR Value (dB) Up to 3 decimal places.
ThQpsk3/4ToQpsk1/2 - CINR Value (dB) Up to 3 decimal places.
ThQpsk1/2ToQpsk3/4 - CINR Value (dB) Up to 3 decimal places.
ThQpsk1/2ToBpsk1/2 - CINR Value (dB) Up to 3 decimal places.
ThBpsk1/2ToQpsk1/2 - CINR Value (dB) Up to 3 decimal places.
ULModDefault Select the default modulation and coding rate for the uplink
channel. This value is used only when Adaptive Modulation is disabled. When
Adaptive Modulation is disabled the base station
Adaptive Modulation is disabled the base station
0 - BPSK(1/2)
1 - QPSK(1/2)
2 - QPSK(3/4)
3 - 16QAM(1/2)
4 - 16QAM(3/4)