Redline Communications Inc. AN50S 用户手册

 

 

AN-50 System User Manual 

Redline Communications 

 

…..solving the first mile challenge. 

 
Signal – The “Signal” LED lights solid green if the system, the link (the 
(links for a master) and the provisioned connections all operate within 
configured parameters.   
Wireless Signal LED will light solid green if the system is operating at 
an error rate of less than one out of one million packets. If errors 
exceed one in one million, the LED will flash.  If the wireless link 

becomes poor, the LED will turn off. 
 
Flashing may not be a serious problem if the LED flashes only intermittently, however, if 
it flashes constantly, the table below summarizes some possible causes: 
  

Symptom 

Possible Problem 

Solution 

Obstructions in the propagation 
path causing signal 
degradation.  

Try to remove obstacles or re-
locate antenna.  

Antenna moved, due to high 
winds. 

Re-align the antenna. 

Weak RF Link 
(Signal LED 
flashes) 

Poor cable connection between 
transceiver and antenna. 

Repair or replace the RF cable. 

 
 
 
 

 
The Ethernet Link LED will light solid green when the LAN 
connection to the host computer/server or switch/router is 
functioning properly.  The Link LED flashes when the LAN 
connection to the host computer/server or switch/router is 
functioning properly and there is traffic. If the LED is off, 
look for the following problems: 

 

Page 49 of 76