Redline Communications Inc. AN80IB 用户手册
User
AN-80i
Manual
70-00072-01-06a
Proprietary Redline Communications © 2008
Page 20 of 96
June 1, 2008
3.4 System
Status
Click
System
Status
in the menu to view system, Ethernet statistics, and wireless
interface statistics.
Figure 7: Web - System Status Screen
General information
System Name: Displays the user-assigned system name.
Software Version: Displays the software version in use.
RF Link Established: Status for the wireless link connection.
Software Version: Displays the software version in use.
RF Link Established: Status for the wireless link connection.
Yes - RF link has been successfully established with the remote-end AN-80i.
No - RF link has not been established with the remote-end AN-80i.
No - RF link has not been established with the remote-end AN-80i.
Uncoded Burst Rate: The negotiated uncoded burst rate (UBR) for the link.
System Mode: The PTP Master establishes and manages the wireless link with the
remote end AN-80i. Each wireless link must have only one PTP Master.
System Mode: The PTP Master establishes and manages the wireless link with the
remote end AN-80i. Each wireless link must have only one PTP Master.
PTP Master: An-80i transmits automatically; sending poll messages to the remote
AN-80i and negotiating the UBR (modulation and coding) for the wireless link.
PTP Slave: This unit waits passively until polled by the PTP Master.
AN-80i and negotiating the UBR (modulation and coding) for the wireless link.
PTP Slave: This unit waits passively until polled by the PTP Master.
RF Channel Frequency: User-assigned RF channel.
Tx Power: The current transmit power level. If ATPC is enabled, this value may be
different than the Tx Power setting in the
Tx Power: The current transmit power level. If ATPC is enabled, this value may be
different than the Tx Power setting in the
System
Configuration
screen.