Redline Communications Inc. AN80IC 用户手册
Red
CONNEX
™
User
AN-80i
Manual
70-00072-01-05-DRAFT
Proprietary Redline Communications © 2008
Page 20 of 94
January 22, 2008
3.4 System
Status
Click
System
Status
in the menu to view system, Ethernet statistics, and wireless interface
statistics.
Figure 7
: Web - System Status Screen
General information
System Name: Displays the user-assigned system name.
Software Version: Displays the software version in use.
RF
Link
Established: Status for the wireless link connection.
Yes - RF link has been successfully established with the remote-end AN-80i.
No - RF link has not been established with the remote-end AN-80i.
Uncoded Burst Rate: The negotiated uncoded burst rate (UBR) for the link.
System Mode: The PTP Master establishes and manages the wireless link with the
remote end AN-80i. Each wireless link must have only one PTP Master.
remote end AN-80i. Each wireless link must have only one PTP Master.
PTP Master: This unit begins transmitting automatically; sending poll messages to
the remote AN-80i and negotiating the UBR (modulation and coding) for the wireless
link.
PTP Slave: This unit waits passively, monitoring the selected channel(s) until polled
by the PTP Master.
the remote AN-80i and negotiating the UBR (modulation and coding) for the wireless
link.
PTP Slave: This unit waits passively, monitoring the selected channel(s) until polled
by the PTP Master.
RF Channel Frequency: User-assigned RF channel.
Tx Power: The current transmit power level. If ATPC is enabled, this value may be
different than the Tx Power setting in the
different than the Tx Power setting in the
System
Configuration
screen.