Redline Communications Inc. AN80IC 用户手册
Red
CONNEX
™
User
AN-80i
Manual
70-00072-01-05-DRAFT
Proprietary Redline Communications © 2008
Page 77 of 94
January 22, 2008
5.3.16 Snmptrap
Use the snmptrap command to configure the SNMP trap message reporting.
Table 30: CLI - snmptrap
PTP PMP Description
√
√
add
: add a new snmp trap to the snmp trap table. The index value is assigned
automatically. Up to eight settings can be entered.
snmptrap add <ipaddr> <port> <community> <Enter>
change
: Modify the specified snmp setting.
snmptrap change <idx> [-p <port>] [-i <ip_add>] [-c <community] <Ent>
del
: Delete the specified snmp setting.
snmptrap del <idx> <Enter>
print
: List all SNMP trap settings.
snmptrap print <Enter>
5.3.17 Test
Use the test command to load the current edited (but not permanently saved)
configuration settings.
configuration settings.
Table 31: CLI - test
PTP PMP Parameter/Description
√
√
config
- AN-80i configuration settings
test
config
<Enter>
The AN-80i will operate with these settings for a period of five minutes. During the 'test'
period, you may click the Save button at any time to save this configuration permanently
(also terminating the five minute timer). If the Save button is not selected, the previous
saved settings are reloaded.
period, you may click the Save button at any time to save this configuration permanently
(also terminating the five minute timer). If the Save button is not selected, the previous
saved settings are reloaded.
5.3.18 Upgrade
Use the upgrade command to upload a new software binary file to the AN-80i.
Table 32: CLI - upgrade
PTP PMP Description
√
√
ipaddr
: Enter the IP address of the TFTP server.
filename
: Enter the name of the binary file to be uploaded to the AN-80i.
upgrade
<ipaddr>
<filename> <Enter>
You must specify the TFTP server address and the full name of the binary file
(including .bin extension). The AN-80i software binary file must be located in
the default directory of the TFTP server.
(including .bin extension). The AN-80i software binary file must be located in
the default directory of the TFTP server.