Redline Communications Inc. AN80IE 用户手册
&
User
AN-80i
Manual
70-00072-01-07
Proprietary Redline Communications © 2010
Page 42 of 106
Sept 18, 2008
3.9
Upload Software
Click
Upload
Software
in the left hand menu to display the Upload Software screen. This
screen is used to upgrade the AN-80i with new software. The AN-80i contains non-
volatile storage for two versions of the software. The upload overwrites the non-
operational (unselected) version.
volatile storage for two versions of the software. The upload overwrites the non-
operational (unselected) version.
Figure 16: Web - Upload Software Screen
Transfer Protocol: Select the type of server:
TFTP: Use Trivial File Transfer Protocol for file upload.
FTP: Use File Transfer Protocol for file upload.
Server IP Address: Enter the IP address of the computer with the software upgrade file.
The designated computer must be running a TFTP/FTP server.
The designated computer must be running a TFTP/FTP server.
Software File Name: Name of the software binary file (including file extension).
FTP User Name: Enter the user account name on the FTP server.
FTP Password: Enter the password for the user account name on the FTP server.
Upgrade Steps
A TFTP/FTP server is used to upload the new software image file from your computer to
the AN-80i. TFTP/FTP server software must be installed and running on the computer
you are using to upload the new software file. In addition, the AN-80i software binary file
must be located in the default upload directory for the TFTP/FTP server.
the AN-80i. TFTP/FTP server software must be installed and running on the computer
you are using to upload the new software file. In addition, the AN-80i software binary file
must be located in the default upload directory for the TFTP/FTP server.
1.
Enter the IP Address of the computer running the TFTP/FTP server.
2.
Enter the full name of the binary file (including the .bin extension).
3.
Click Upload File to begin the file transfer. The upgrade file size is approximately four
Megabytes and takes a minimum of four to eight minutes to transfer. Slower network
connections may take longer. Do not interrupt the transfer process.
Megabytes and takes a minimum of four to eight minutes to transfer. Slower network
connections may take longer. Do not interrupt the transfer process.
4.
When the transfer is complete, the AN-80i verifies the integrity of the new file. If
errors were introduced during the transfer process, the software file is rejected and a
warning message is registered in the event log, and you must repeat the upload.
errors were introduced during the transfer process, the software file is rejected and a
warning message is registered in the event log, and you must repeat the upload.
5.
When the transfer has completed successfully, use the System Configuration screen
to select which software version to load on the next system reboot (does not switch
automatically following upload).
to select which software version to load on the next system reboot (does not switch
automatically following upload).