Redline Communications Inc. RDL3000RM 用户手册
RDL-3000 FAMILY
RM PRODUCT MANUAL
70-00184-01-00
Proprietary Redline Communications © 2012
Page
12
of 14
March 1, 2012
Industry Canada Notices: Deployment in Canada:
The RDL-3000-RM has been designed to operate with an antenna having a maximum
gain of 19 dBi. Antenna having a higher gain is strictly prohibited per regulations of
Industry Canada. The required antenna impedance is 50 ohms.
gain of 19 dBi. Antenna having a higher gain is strictly prohibited per regulations of
Industry Canada. The required antenna impedance is 50 ohms.
This device has been designed to ensure that radio frequency emissions are maintained
within the band of operation under all normal operating conditions listed in this manual.
within the band of operation under all normal operating conditions listed in this manual.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation
is subject to the following two conditions:
is subject to the following two conditions:
1.
This device may not cause interference, and
2.
This device must accept any interference, including interference that may cause
undesired operation of the device.
undesired operation of the device.
To reduce potential radio interference to other users, the antenna type and its gain
should be so chosen that the equivalent isotropic radiated power (EIRP) is not more than
that required for successful communication.
should be so chosen that the equivalent isotropic radiated power (EIRP) is not more than
that required for successful communication.
This Class B Digital apparatus meets all the requirements of the Canadian Interference-
Causing Equipment.
Causing Equipment.
The following notices about deployment in Canada are included in training and
documentation provided to professional installers and operators of the final product:
documentation provided to professional installers and operators of the final product:
1.
The final product must be professionally installed.
2.
WARNING -- IC RF Exposure Warnings
To satisfy IC RF exposure requirements for RF transmitting devices, the following
distances should be maintained between the antenna of this device and persons
during device operation:
distances should be maintained between the antenna of this device and persons
during device operation:
Table 12: Recommended Safe Distances
Frequency (GHz)
Deployment
Separation Distance
4.9 - 5.3
PMP
120 cm (47.25 in) or more
5.8
PMP
20 cm (7.8 in) or more
To ensure compliance, operation at closer than these distances is not
recommended. The antenna used for this transmitter must not be collocated in
conjunction with any other antenna or transmitter.
recommended. The antenna used for this transmitter must not be collocated in
conjunction with any other antenna or transmitter.
Déploiement aux le Canada
Le RDL-3000-RM a été conçu pour fonctionner avec une antenne ayant un gain
maximal de 19 dBi. Antenne ayant un gain plus élevé est strictement interdite par les
règlements d'Industrie Canada. L'impédance d'antenne requise est de 50 ohms.
maximal de 19 dBi. Antenne ayant un gain plus élevé est strictement interdite par les
règlements d'Industrie Canada. L'impédance d'antenne requise est de 50 ohms.
Ce dispositif a été conçu pour veiller à ce que les émissions de radiofréquences sont
maintenus dans la bande de fonctionnement dans toutes les conditions normales de
fonctionnement figurant dans ce manuel.
maintenus dans la bande de fonctionnement dans toutes les conditions normales de
fonctionnement figurant dans ce manuel.
Cet appareil est conforme la norme d'Industrie Canada exempts de licence RSS (s). Son
fonctionnement est soumis aux deux conditions suivantes:
fonctionnement est soumis aux deux conditions suivantes:
1.
Cet appareil ne peut pas causer d'interférences, et
2.
Cet appareil doit accepter toute interférence, y compris les interférences qui peuvent
causer un mauvais fonctionnement de l'appareil.
causer un mauvais fonctionnement de l'appareil.