Redline Communications Inc. RDL3000RME2 用户手册
RDL-3000-RME
PRODUCT MANUAL
70-00184-05-00
Proprietary Redline Communications © 2018
Page
30
of 32
July 10, 2018
5.2 Industry Canada Notices (Canada)
This Class B Digital apparatus meets all the requirements of the Canadian Interference-
Causing Equipment.
Causing Equipment.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
The following notices about deployment in Canada are included in training and
documentation provided to professional installers and operators of the final product:
documentation provided to professional installers and operators of the final product:
1.
The final product must be professionally installed.
2.
WARNING -- IC RF Exposure Warnings
To satisfy IC RF exposure requirements for RF transmitting devices, the following
distances should be maintained between the antenna of this device and persons
during device operation:
distances should be maintained between the antenna of this device and persons
during device operation:
Table 50: IC: RDL-3000-RME Recommended Safe Distances
Frequency (MHz)
Deployment
Separation Distance
2305 - 2320
2345 - 2360
PMP
85 cm (33.5") or more
2400 - 2483.5
PMP
23 cm (9") or more
To ensure compliance, operation at closer than these distances is not
recommended. The antenna used for this transmitter must not be collocated in
conjunction with any other antenna or transmitter.
recommended. The antenna used for this transmitter must not be collocated in
conjunction with any other antenna or transmitter.
The equipment has been designed to operate with an antenna having a maximum gain
of 17 dBi. Antenna having a higher gain is strictly prohibited per regulations of Industry
Canada. The required antenna impedance is 50 ohms.
of 17 dBi. Antenna having a higher gain is strictly prohibited per regulations of Industry
Canada. The required antenna impedance is 50 ohms.
This device has been designed to ensure that radio frequency emissions are maintained
within the band of operation under all normal operating conditions listed in this manual.
within the band of operation under all normal operating conditions listed in this manual.
IC regulations governing operation in the 2305-2320 MHz and 2345-2360 MHz bands
are subject to licensing, pursuant to subsection 4(1) of the Radiocommunication Act.
are subject to licensing, pursuant to subsection 4(1) of the Radiocommunication Act.
This equipment complies to RSS-195 in the frequency bands 2305-2320 MHz and 2345-
2360 MHz and RSS-210 Annex 8 in the frequency band 2400-2483.5 MHz.
2360 MHz and RSS-210 Annex 8 in the frequency band 2400-2483.5 MHz.
This device complies with Industry Canada license-exempt RSS standard(s). Operation
is subject to the following two conditions:
is subject to the following two conditions:
1.
This device may not cause interference, and
2.
This device must accept any interference, including interference that may cause
undesired operation of the device.
undesired operation of the device.
To reduce potential radio interference to other users, the antenna type and its gain
should be so chosen that the equivalent isotropic radiated power (EIRP) is not more than
that required for successful communication.
should be so chosen that the equivalent isotropic radiated power (EIRP) is not more than
that required for successful communication.