Redline Communications Inc. SUIIRM 用户手册

Red

MAX

™

Subscriber Modem

SU-I User Manual

70-00078-01-02-DRAFT

May 12, 2008

Page 26 of 50

4.3.1 boardConfig - Board Setup Commands

The boardConfig mode allows you to view and modify the subscriber board level
settings. The following table lists all commands available in this mode.

Table 10: CLI - boardConfig - Board Commands

Command

Description

reset

Set all parameters to factory default values. Confirmation required.

set

Change parameter settings.
RefOscFreq: Enter an unsigned integer as the new RefOscFreq value

(Hz). Value can be only 32000000 or 40000000.

TxIfFreq: Enter the TxIfFreq (Hz) value (around 44000000).
RxIfFreq: Enter the RxIfFreq (Hz) value (around 44000000).
RfType: Enter an unsigned char as the new RfType value. One of:
0 - None
1 - Radia 3.5 GHz
2 - Radia 5.8 GHz
3 - SMI
4 - Factory Test
IfPresent: Enter an unsigned char as the new IfPresent value.
0 - Baseband only
1 - IF present
TxSpectrumInv: Enter a boolean as the new TxSpectrumInv value.
RxSpectrumInv: Enter a boolean as the new RxSpectrumInv value.
Buzzer: Antenna positioning buzzer.
0 - Disabled
1 - Enabled.
DebugLog: Factory debug messages.
0 - Disabled.
1- Enabled.

show

Display the current setting for all parameters. For example:

Structure --- <<SS Mmgt Board Configuration Parameter>>

Transmit

Receive

Others

------------------------------ ------------------------------

----------------

IfFreq: 44000000Hz

IfFreq:

44000000Hz

RefOscFreq:

32000000Hz

SpectrumInv: disabled(0)

RfType:

SMI(3)

IfPresent:

IF_Present(1)

Buzzer:

disabled(0)

DebugLog:

disabled(0)