Redline Communications Inc. SUIIRM 用户手册

™

 

 

 

70-00078-01-02-DRAFT 

Proprietary Redline Communications © 2008 

May 12, 2008 

Page 49 of 50

 

 

1.  Start a telnet session to the subscriber using the following settings: 

 

Login: 

  admin 

 

Password:  

admin 

2.  Enter the 'loadImage' command. The subscriber will prompt you to enter the 

following information:  

Server IP address:  [enter address of FTP server] 

File Name:   [enter 

base 

station binary file name]   

The subscriber performs FTP server authentication with user name 'target' and 
password 'secret' (these settings cannot be altered). The image will be uploaded to 
the subscriber and saved in the non-volatile memory (flash). 

3.  The subscriber must be reset to load the new software. Enter the 'reboot' 

command to reset the unit. The telnet session will be terminated. 

 

Login: admin 
Password: 
admin, welcome to the SS CLI. 
SUI#> loadImage 
Server IP Address: 

[enter ftp server IP address here] 

File Name: 

[enter binary file name here] 

Opening FTP connection.....Done 
Downloading image  
............................................................................................……………… 
Done 
Programming update........Done 
Erasing setup partition. Done. 
Writing setup partition. Done. 
Erasing boot block. Done 
Programming boot block. Done 
Flash programming complete. 
SUI#>reboot