Chi Mei Communication Systems Inc. GOXW 用户手册
Chapter 1: Getting Started
3
1.3 Installing Memory Card
You need a microSD
®
card to store photos, music, videos, and other data.
To install the memory card
1. Open the card cover.
2. Insert the microSD card as shown. Make sure the gold
2. Insert the microSD card as shown. Make sure the gold
contacts are facing down.
To remove the memory card
1. Open the card cover.
2. Push to eject the microSD card from the slot.
2. Push to eject the microSD card from the slot.
NOTE:
Do not remove the memory card while the device is turned on. Sudden
removal of the memory card may cause data loss or unpredictable system hang up.
1.4 Charging Battery
The battery is only partially charged. To fully charge the battery, charge it for 5 hours.
Charge the battery
1. Connect one end of the AC adapter to the DC jack of
the device.
2. Plug the other end of the AC adapter to the wall outlet
to start charging.
When the battery is charging and the device is turned on,
the icon is displayed on the status bar. When the
battery is fully charged and the AC adapter is removed
from the device, the icon is displayed on the status bar.
the icon is displayed on the status bar. When the
battery is fully charged and the AC adapter is removed
from the device, the icon is displayed on the status bar.
NOTE:
Battery can also be charged when the device is connected to a computer
using the micro USB cable.
8VHUVKDYHWRXVHWKHFRQQHFWLRQWR86%LQWHUIDFHVZLWK86%YHUVLRQRUKLJKHU