AirVast Technology Inc. WM168B 用户手册
M033103V10
16
dialog box, and remove the tick in the Use Windows to configure my wireless network
settings checkbox.
settings checkbox.
Figure 2.4-11: The Wireless Network Connection Properties Dialog Box
n) Click OK. Now, you have successfully removed the Windows Zero Configuration.
To monitor and configure the network via PRISM Configuration Utility, double-click its
tray icon, and you should find four tabs contained in the popped up PRISM Wireless
Settings dialog box at this time. For more details about the utility, please refer to
tray icon, and you should find four tabs contained in the popped up PRISM Wireless
Settings dialog box at this time. For more details about the utility, please refer to
PRISM
Configuration Utility Basics
below.
Note: If you wish to use Windows XP’s built-in configuration tools – Windows XP Zero Configuration,
please refer to the next chapter:
please refer to the next chapter:
Configuration for Windows XP
to configure the WLAN USB Module.
2.5 Verifying a Successful Installation
To confirm that your 802.11b Wireless LAN USB Module is properly installed, please go along with the
procedures below.
procedures below.
1. Right-click
the
My Computer desktop icon, and choose Properties from the opened menu.
2. In
the
System Properties dialog box, choose Device Manager if you are under Windows 98
or Me. If you are operating Windows 2000 or XP, click the Hardware tab, and then choose
the Device Manager button.
the Device Manager button.
3. In the opened window, expanding Network adapters to find the USB Module - WLAN
IEEE802.11b PRISM USB Adapter. Right-click over the item and choose Properties.