AirVast Technology Inc. WM168B 用户手册
M033103V10
27
Link Quality
Link Quality is based on the percentage of successfully transmitted or received signal of the
associated access point beacon within a limited period. The higher the percentage, the better the
link quality. The bar graph beside also provides a visual interpretation of the current link quality. It is
note that the Link Quality and Signal Strength features only apply to the infrastructure mode. They
are inapplicable in the Ad-Hoc mode since data will be transferred from many different computers.
associated access point beacon within a limited period. The higher the percentage, the better the
link quality. The bar graph beside also provides a visual interpretation of the current link quality. It is
note that the Link Quality and Signal Strength features only apply to the infrastructure mode. They
are inapplicable in the Ad-Hoc mode since data will be transferred from many different computers.
Signal Strength
You may learn the received signal strength of the baseband processor of the Beacon signal from the
Signal Strength bar beside, and it’s also presented in terms of percentage. As the signal gets
stronger, you will see the signal percentage rate gets higher. It is noted that the Signal Strength and
Link Quality features only apply to the Infrastructure mode. They are inapplicable in the Ad-Hoc
mode since data will be transferred from many different computers.
Signal Strength bar beside, and it’s also presented in terms of percentage. As the signal gets
stronger, you will see the signal percentage rate gets higher. It is noted that the Signal Strength and
Link Quality features only apply to the Infrastructure mode. They are inapplicable in the Ad-Hoc
mode since data will be transferred from many different computers.
The Configuration Tab
Click this tab to save different profiles for different network configurations. When finish changing the
settings, please click Apply to perform the new configuration at last.
settings, please click Apply to perform the new configuration at last.
Note: Choose the Advanced Configuration command from the right-click menu of PRISM Configuration
Utility tray icon will launch this tab too.
Utility tray icon will launch this tab too.
Figure 4.3-3: The Configuration Tab
Profile Name
Enter texts in the Profile Name field to identify a new profile. After defining the configurations below,
click the Apply button to establish the profile. To switch between any existing profiles, simply click
the arrow button at the right of the Profile Name field to open the pull-down menu and then select
the intended one from it.
click the Apply button to establish the profile. To switch between any existing profiles, simply click
the arrow button at the right of the Profile Name field to open the pull-down menu and then select
the intended one from it.