Microsoft Corporation RM-132X 用户手册
Settings
115
Phone and SIM
PIN code request
—When active, the code is requested
each time the device is switched on. Deactivating the
personal identification number (PIN) code request may not
be allowed by some SIM cards. See ‘Glossary of PIN and
lock codes’, p. 115.
personal identification number (PIN) code request may not
be allowed by some SIM cards. See ‘Glossary of PIN and
lock codes’, p. 115.
PIN code
,
PIN2 code
, and
Lock code
—You can change the
lock code, PIN code, and PIN2 code. These codes can only
include the numbers from 0 to 9. If you forget any of these
codes, contact your service provider. See ‘Glossary of PIN
and lock codes’, p. 115.
include the numbers from 0 to 9. If you forget any of these
codes, contact your service provider. See ‘Glossary of PIN
and lock codes’, p. 115.
Avoid using access codes similar to the emergency
numbers to prevent accidental dialing of the emergency
number.
numbers to prevent accidental dialing of the emergency
number.
Autolock period
—You can set an autolock period, a
time-out after which the device automatically locks. To
turn off the autolock period, select
turn off the autolock period, select
None
.
To unlock the device, enter the lock code.
When the device is locked, calls still may be possible to the
official emergency number programmed into your device.
official emergency number programmed into your device.
Tip! To lock the device manually, press
. A list of
commands opens. Select
Lock phone
.
Lock if SIM changed
—You can set the device to ask for
the lock code when an unknown SIM card is inserted into
your device. The device maintains a list of SIM cards that
are recognized as the owner’s cards.
are recognized as the owner’s cards.
Closed user group
—You can specify a group of people to
whom you can call and who can call you (network service).
When calls are limited to closed user groups, calls may be
possible to the official emergency number programmed
into your device.
possible to the official emergency number programmed
into your device.
Confirm SIM services
—You can set the device to display
confirmation messages when you are using a SIM card
service (network service).
service (network service).
Glossary of PIN and lock codes
If you forget any of these codes, contact your service
provider.
provider.
Personal identification number (PIN) code—This code
protects your SIM card against unauthorized use. The PIN
code (4 to 8 digits) is usually supplied with the SIM card.
After three consecutive incorrect PIN code entries, the
code is blocked, and you need the PUK code to unblock it.
protects your SIM card against unauthorized use. The PIN
code (4 to 8 digits) is usually supplied with the SIM card.
After three consecutive incorrect PIN code entries, the
code is blocked, and you need the PUK code to unblock it.
PIN2 code—This code (4 to 8 digits) is supplied with some
SIM cards, and is required to access some functions in
your device.
SIM cards, and is required to access some functions in
your device.
Lock code (also known as security code)—This code (5
digits) can be used to lock the device to avoid
unauthorized use. The factory setting for the lock code is
12345. To avoid unauthorized use of your device, change
digits) can be used to lock the device to avoid
unauthorized use. The factory setting for the lock code is
12345. To avoid unauthorized use of your device, change
R1108_en.book Page 115 Thursday, August 21, 2008 2:55 PM