Advanced Control Technologies Inc. 0608-0X 用户手册

ZTH100 Operating Instructions
060902

HomePro

by ADVANCED CONTROL TECHNOLOGIES, INC.

16

This menu is used to copy information from the Master Remote A master remote must be used to include new modules
to the network and to reset modules. Transmitter to other remote transmitters, so that they may control units known
by the Master Remote Transmitter.

A replication of a remote is done as follows:

1.  Select “Receive information” on the remote which should  receive the information (i.e. the Secondary

Remote)

2.  Select “Send information” and either “Identical copy” or “Only system information” on the remote that is to

send the information (i.e. the Master Remote).

3.  Wait until transmission is completed and both the remote transmitters return to clock display.
4.  If a transmission error occur. Please repeat from 1.

Considerations:

1.  It is important to note that all information on the receiving remote will be deleted before  any information is

received.

2.  Burglar deterrent and timer information is not copied to the secondary remote.
3.  Slave remote transmitters can not  be used to add newly acquired or reset modules to the network
4.  If a secondary remote is added as one of the first 64 units, it will take up a node ID thus limiting the number

of units that can be controlled from the master remote.

5.  If modules are moved physically it should be done as mentioned in 4.6.5 and the replication should be

repeated

6.  New modules added to the network are not automatically known by the secondary remote transmitters.

They have to be transferred from the Master Remote  by the replication process, or by adding the new
node to a group or scene on the secondary remote before it is known by the Master Remote.