Advanced Control Technologies Inc. 0608-0X 用户手册
ZTH100 Operating Instructions
060902
060902
HomePro
by ADVANCED CONTROL TECHNOLOGIES, INC.
6
4.2.3 EXCEEDING NODE LIMIT.
This application supports up to 64 modules. If the user tries to add more than 64 modules to a group or scene this
message will be displayed:
message will be displayed:
However the module will be given a valid ID and it will be used as a repeater if it supports this functionality, but it cannot
be directly controlled by this remote.
be directly controlled by this remote.
4.2.4 ADDING UNSUPPORTED DEVICE TYPES TO THE NETWORK
As mentioned elsewhere devices of other types than multilevel and binary switches can be included into the network
and will be used by the protocol; they cannot be controlled by this application. If the user adds an unknown device to
the network this information will be displayed:
and will be used by the protocol; they cannot be controlled by this application. If the user adds an unknown device to
the network this information will be displayed:
4.2.5 NAME A GROUP/SCENE
To name a group or scene enter the relevant menu. Then select the group/scene name to be edited.
In order to delete a name, just select the group/scene and clear the old name using “C”.
In order to delete a name, just select the group/scene and clear the old name using “C”.
Note: Shaded area indicates “blinking” cursor.
4.2.5.1 CHARACTER SET.
The characters available for naming are: ‘A’,’B’,’C’,’D’,..,’Z’, and ’0',’1',’2',..,’9',’ ‘
Note that no lower case letters are available to the user.
Note that no lower case letters are available to the user.