Rayence Co. Ltd. RY1417W 用户手册
11
R-USM-020
(5) Components Description
The detector is designed to capture radiographic images.
Captured images are transmitted to PC using the wireless/wired
connection.
connection.
(1) Detector
1. Wireless antennas
The module adopts the latest 802.11n Dual-Band technology
(2.4Ghz and 5Ghz). The transmitter of the module is powered by
host equipment(Detector). The antennas are 2 printed-dipole
antennas.
(2.4Ghz and 5Ghz). The transmitter of the module is powered by
host equipment(Detector). The antennas are 2 printed-dipole
antennas.
*Wireless module information:
The SparkLAN WPEA-121N 802.11 a/b/g/n half mini PCI-e module is
implemented. It supports 2T2R (2 transmit 2 receive) MIMO technology, which
delivers throughput up to 300Mbps.
The SparkLAN WPEA-121N 802.11 a/b/g/n half mini PCI-e module is
implemented. It supports 2T2R (2 transmit 2 receive) MIMO technology, which
delivers throughput up to 300Mbps.
1417WGC in the RF module does not use DFS band.
*RF module (FCC ID:
*RF module (FCC ID:
PPD-AR5BHB116
)
2. Battery unlock-lever : This is an unlock-lever to remove battery.
3. Power button : Power on / Power off switch.
4. LED indicator: The LED indicates the state of detector.
i. Green on : Power on.
ii. Blue blinking : Wireless Connection.
iii. Orange on : Low battery.
5. Link cable connector : This is a connector for wire communication
and power supplying. Connect the detector to the power supply
using Link cable.
6. Reset button : This is a button for factory reset.