HIMS International Corporation H332B 用户手册
94
type in a number, which will make the margin as big as you would
like to have it.
like to have it.
3) Set left margin
This sets the left margin for ink printing. The left margin is the
distance from the left edge of the paper to the first text that is
printed. The default value is set to 20 mm (about 0.78 inches). If
you are going to change the default setting, you can type in a
number, which will make the margin as big as you would like to
have it.
distance from the left edge of the paper to the first text that is
printed. The default value is set to 20 mm (about 0.78 inches). If
you are going to change the default setting, you can type in a
number, which will make the margin as big as you would like to
have it.
4) Set right margin
This sets the right margin for ink printing. The right margin is the
distance from the right end of the printed text to the right edge of
the paper. The default value is set to 20mm (about 0.78 inches).
If you are going to change the default setting, you can type in a
number, which will make the margin as big as you would like to
have it.
distance from the right end of the printed text to the right edge of
the paper. The default value is set to 20mm (about 0.78 inches).
If you are going to change the default setting, you can type in a
number, which will make the margin as big as you would like to
have it.
5) Set page numbering
This sets the position where the page numbers will be printed.
The page number positions are “upper left,” “upper middle,”
“upper right,” “lower left,” “lower middle,” and “lower right.” To
change the setting, press “space.” Pressing “backspace” will
allow you to move in reverse order. After selecting your
preference, you should press “space-4” in order to move to the
next setting.
The page number positions are “upper left,” “upper middle,”
“upper right,” “lower left,” “lower middle,” and “lower right.” To
change the setting, press “space.” Pressing “backspace” will
allow you to move in reverse order. After selecting your
preference, you should press “space-4” in order to move to the
next setting.
6) Header
This is used to edit the header that will be printed at the top of
each page. Move to “header,” and type in the text that you want
to be printed.
each page. Move to “header,” and type in the text that you want
to be printed.
7) Footer
This is used to edit the footer that will be printed at the bottom of
each page. Move to “footer,” and type in the text that you want to
be printed.
each page. Move to “footer,” and type in the text that you want to
be printed.
8) Distance between lines
This sets the distance between the lines that will be printed. The
default value is set to 150%. The distance can be anywhere from
100% to 300%. If you type in a value that exceeds this range, the
Braille Sense Plus B32 will say “Out of range. Value too large,”
and wait for you to type in another value.
default value is set to 150%. The distance can be anywhere from
100% to 300%. If you type in a value that exceeds this range, the
Braille Sense Plus B32 will say “Out of range. Value too large,”
and wait for you to type in another value.