HIMS International Corporation H332B 用户手册
257
After the file is pasted successfully, you will also hear, “paste
completed,” and you will be returned to the local folder list.
completed,” and you will be returned to the local folder list.
12.2.3.2 Send To
This function will allow you to send files from the local folder list to the
remote folder list. It is only available in the local folder list. This is
very similar to the copy and paste function. The difference is that you
do not have to paste the file to the remote folder. It is done as soon
as you activate the “send to” function. When you activate this
function, the file can only be sent to the root of the remote folder list.
To activate the “send to” function, perform the following steps:
1. After the FTP service is connected, you can press “space-m (dots
1-3-4)” while you are in the remote folder list to open the menu.
Then, press “space-1” or “space-4” to move to “open local folder,”
and press “enter.” You can also activate this function without
calling up the menu by pressing “enter-o (dots 1-3-5).”
Then, press “space-1” or “space-4” to move to “open local folder,”
and press “enter.” You can also activate this function without
calling up the menu by pressing “enter-o (dots 1-3-5).”
2. After you have activated this function, you will see the disk list, just
like when you open the file manager. You will be taken to
“flashdisk” by default. However, if you have a CF memory card or
USB memory stick inserted, you can navigate to those disks by
pressing “space-1” or “space-4.” Please refer to chapter 3 in this
manual regarding navigation keys in the file manager.
“flashdisk” by default. However, if you have a CF memory card or
USB memory stick inserted, you can navigate to those disks by
pressing “space-1” or “space-4.” Please refer to chapter 3 in this
manual regarding navigation keys in the file manager.
3. Then, select a file by pressing “space” on the file. You can only
select files and not folders.
4. After you have selected a file, press “space-m (dots 1-3-4),” and
then press “space-1” or “space-4” to move to “send to,” and press
“enter.” Or, you can press “enter-s (dots 2-3-4)” to activate the
“send to” function without having to call up the menu.
“enter.” Or, you can press “enter-s (dots 2-3-4)” to activate the
“send to” function without having to call up the menu.
5. Just like copying and pasting, you will hear a sound that indicates
that the Braille Sense Plus B32 is working. If the file is larger than
300 KB, you will also hear the progress meter each time an
additional 10% has been completed. If the file is less than 300 KB,
then you will only hear the sound, and not the progress meter.
When the transfer has completed, you will hear, “xxx file sent,”
where xxx is the name of the file. If the file does not transfer, you
will hear, “xxx file not sent.” Once all of the files have been
transferred completely, you will hear, “sent completely,” and you
will be returned to the remote folder list.
300 KB, you will also hear the progress meter each time an
additional 10% has been completed. If the file is less than 300 KB,
then you will only hear the sound, and not the progress meter.
When the transfer has completed, you will hear, “xxx file sent,”
where xxx is the name of the file. If the file does not transfer, you
will hear, “xxx file not sent.” Once all of the files have been
transferred completely, you will hear, “sent completely,” and you
will be returned to the remote folder list.