HIMS International Corporation H332B 用户手册
261
You cannot use ActiveSync via USB and Bluetooth at the same time.
If the remote Bluetooth device is connected via USB and using
ActiveSync, you must disconnect the remote Bluetooth device in
order to use the ActiveSync service via Bluetooth.
If the remote Bluetooth device is connected via USB and using
ActiveSync, you must disconnect the remote Bluetooth device in
order to use the ActiveSync service via Bluetooth.
12.2.5 Serial Port
If you connect this service, you should not connect the other services.
The Serial Port service will allow you to use your Braille Sense Plus
B32 as a wireless Braille display via Bluetooth. In order to use the
Braille Sense Plus B32 as a wireless Bluetooth display, please
reference the following sections. Note that you must be using
Window-Eyes in order to use the Braille Sense Plus B32 as a
wireless Braille display. Note that following explanation is how to use
the serial port when the Window-Eyes is installed as a screen reader
program in PC. If you are using JAWS or Supernova as a screen
reader, please contact HIMS by e-mail. The e-mail id of HIMS is
hims@himsintl.com
.
12.2.5.1 Setting up the Braille Sense Plus B32 to Work as a
Bluetooth Braille Display
Bluetooth Braille Display
The following steps will walk you through setting up the Braille Sense
Plus B32 to work as a Bluetooth Braille display. These instructions
assume that you already have Bluetooth installed on your computer.
The following instructions assume that you are running Window-Eyes
5.5, or greater, and at least Windows XP, Service Pack 2. Before
starting, make sure that your Braille Sense Plus B32 is turned on.
Although it may not be necessary, you should close all applications
that are running on the Braille Sense Plus B32, and be in the
Program menu for best performance. If you have more than one
Braille Sense Plus B32, make sure that only the Braille Sense Plus
B32 that you want to configure is turned on.
Plus B32 to work as a Bluetooth Braille display. These instructions
assume that you already have Bluetooth installed on your computer.
The following instructions assume that you are running Window-Eyes
5.5, or greater, and at least Windows XP, Service Pack 2. Before
starting, make sure that your Braille Sense Plus B32 is turned on.
Although it may not be necessary, you should close all applications
that are running on the Braille Sense Plus B32, and be in the
Program menu for best performance. If you have more than one
Braille Sense Plus B32, make sure that only the Braille Sense Plus
B32 that you want to configure is turned on.
12.2.5.2 Setting up the Computer
1. Navigate to the Bluetooth icon in the System Tray. You may do
this in Windows XP by pressing “windows key-b,” and then use the
Right or Left Arrow Keys until you reach the Bluetooth icon. Then,
press the “context menu key.” Note that if you don’t have the
Right or Left Arrow Keys until you reach the Bluetooth icon. Then,
press the “context menu key.” Note that if you don’t have the